Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Window Replacement Across Pinewood
Window replacement in Pinewood means working inside Florida’s High-Velocity Hurricane Zone. Every unit we install carries a Miami-Dade NOA or Florida Product Approval, matched to the design pressure and large-missile rating on your permit drawings. That is not optional here. It is the rule. If you’re pricing replacement windows for a Pinewood home, call (817) 686-2228 and we’ll scope the job against your exact openings, not a guess.

We serve the full Pinewood grid: the blocks around NW 103rd Street, the ranch homes off Pinewood Road, the concrete-block construction that defines this neighborhood. Our crews know what it takes to pull a permit here, pass the opening inspection, and get your wind mitigation paperwork in order. Elliot Vance runs the operation. He sets the standard, and Pinewood is one of the areas we return to most often because the housing stock is consistent and the code requirements are demanding.
Why Meridian Windows & Doors Is Pinewood’s Preferred Window Replacement Company
Pinewood homeowners keep calling us back for one reason: the price goes on paper before a single screw turns, and the crew shows up when we said they would. We are part of Garrison Partners, operating to The Garrison Standard since 2009. That standard covers how we quote, how we install, and how we handle any failure within 365 days. No fine print about labor exclusions. If it fails, we return at no charge.
Our technicians are background-checked and uniformed. When a Pinewood homeowner schedules an estimate, they know exactly who is walking through the door and exactly what the job will cost before it starts. We do not pressure anyone into a sale. We write the scope, the price, and the schedule. Then we do the work. Phones are answered by a live person 24 hours a day, seven days a week, so when you call about your Pinewood project, you speak to a person, not a voicemail loop.
We carry eight manufacturer lines, including PGT, CGI, and CWS. That gives us the flexibility to specify the right window for your Pinewood opening rather than the one sitting in a warehouse. For impact-rated work in this wind zone, that matters. A single-hung PGT with the correct design pressure rating does the job. A standard insulated unit from a big-box shelf does not.
Window Repair in Pinewood
Window repair in Pinewood typically means addressing failed seals, fogged insulated glass, rotted jambs, or hardware that no longer locks. In this housing stock, much of it built since the 1970s, the original glazing has often lost its seal and fogged the IGU. Repair is worth considering when the frame is still square and the rough opening has not shifted. A sash replacement runs lower than a full frame replacement, but in Pinewood’s block construction, opening up the wall often reveals the jamb is not as clean as it looked from the outside.
Seal and Glass Repair
When the insulated glass unit fails, we replace the IGU and match the low-E spec and SHGC to what was originally installed. In Pinewood, we also check whether the existing unit meets current NOA requirements. If it does not, upgrading to an impact-rated laminated glass interlayer assembly is the smarter move, because it brings the unit into compliance and qualifies for wind mitigation credits.
Hardware and Sash Work
Locking hardware, balance systems, and sashes that no longer close cleanly are common on older Pinewood homes near NW 95th Street and the surrounding grid. We stock parts for PGT, CGI, CWS, and ES Windows units locally, which shortens turnaround. If the sash is the only issue and the frame is solid, a sash-only replacement can work. We tell you plainly when it will not.
Window Replacement Company in Pinewood
As a window replacement company serving Pinewood, we do not start with a product. We start with your permit drawings and opening dimensions. Every replacement window in this city must carry a Miami-Dade NOA or Florida Product Approval that matches the exact opening size. We verify the design pressure stamp against the fenestration schedule before ordering anything. That prevents the mid-job rejection that happens when homeowners buy units online and the inspector finds the NOA does not cover that specific configuration.
Full Frame Replacement
Full frame replacement means stripping the old window down to the concrete block and rebuilding the rough opening. In Pinewood, this is often necessary because the original jambs are rotted or out of square from years of humidity and storm exposure. We reframe, reset, and seal so the new unit sits true. The labor is higher on full frame work, but it is the only correct solution when the opening itself has shifted.
Insert Window Replacement
Insert replacement fits a new window into the existing frame. It costs less and moves faster when the existing frame is still solid and square. On Pinewood block homes, we check the jamb carefully before recommending inserts. If there is rot or the frame has moved, inserts will fail early and the guarantee will not save you from the rework.

Trusted Brands We Service in Pinewood
We are authorized to install and replace products from PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. For Pinewood’s HVHZ requirements, PGT and CGI get specified most often because their impact-rated lines carry the design pressure ratings and large-missile certifications this wind zone demands. CWS also works well for homeowners who want a specific frame profile. We stock local parts for these brands, so service calls and warranty work in Pinewood do not stall waiting on a shipment.
Common Window Replacement Problems We See in Pinewood Homes
- Non-NOA units rejected at inspection. Homeowners buy windows online, the inspector checks the NOA, and the unit does not match the opening. The crew has to re-order and the schedule slips. We verify the product approval before anything gets ordered.
- Rotted or out-of-square jambs on block construction. Pinewood’s humidity works on wood frames for decades. When the old window comes out, the rough opening frequently needs reframing. That changes the labor and the final price once walls are open.
- Standard insulated glass instead of impact-rated laminated. A standard IGU fails the HVHZ requirement in Pinewood and voids any wind mitigation credit. If the window is going into a bedroom or a large living-area opening, the large-missile rating must be confirmed against the NOA for that exact size.
- Design pressure stamped wrong for the opening. Some units carry a design pressure that only covers smaller openings. Ordered for a large picture window, the inspector flags it. We match the DP rating to the permit before the order goes to the manufacturer.
What Window Replacement Costs in Pinewood
Impact windows in Pinewood generally run $800 to $1,500 per window installed. Single-hung impact units land between $900 and $1,800 depending on size and design pressure rating. Large or custom openings, like a picture window or a slider conversion, run $2,500 to $5,000. A whole-home package for a typical three-bedroom Pinewood ranch sits between $8,000 and $25,000 or more depending on opening count and frame material. Vinyl costs less than aluminum. Full frame replacement costs more than inserts. Second-floor work adds labor.
The main cost drivers here are opening count, wind zone rating, and whether the rough opening needs reframing once the old unit comes out. We do not quote a range and then move it at the door. You get a written line-item price before work starts. Call (817) 686-2228 for a free in-home measure and a written quote on your Pinewood windows.
Florida Pays You Back
Florida has incentives that offset impact window work, and Pinewood homeowners should know what is available. The My Safe Florida Home program offers matching grants up to $10,000 for qualifying wind-mitigation upgrades. Florida exempts impact-resistant windows and doors from sales tax. The federal 25C energy credit covers 30% of product cost, up to $600 per year, on qualifying energy-efficient units. And after a wind-mitigation inspection, which runs $75 to $150, homeowners can file for windstorm-premium credits that average around 25% on the windstorm portion of the policy. Programs and carriers set the final numbers, so we never guarantee a specific rebate. But we do prepare the paperwork correctly so the credit path is clear.
Pricing for Window Replacement in Pinewood, FL
For a standard single-hung impact window in Pinewood, $900 to $1,800 installed is the honest range. A full frame replacement on a rotting jamb adds $200 to $500 per opening compared to an insert. Custom or large openings run $2,500 to $5,000. The variables are square footage of glass, design pressure rating, frame material, and floor height. Second-story work adds staging time. We do not quote a number and then send a change order after the walls are open. The price is written before work starts, and it does not move unless the scope changes in writing. Our Window Replacement team handles everything from measure to final inspection. Call (817) 686-2228 and we will put the numbers on paper.
We Also Serve Cities Near Pinewood
Our crews serve Pinewood and the surrounding South Florida metro from a Miami-area dispatch office. That covers Miami, Hialeah, Fort Lauderdale, and Pembroke Pines. If you are searching for window replacement outside Pinewood proper, we can likely reach you quickly. Call (817) 686-2228 and we will confirm your address.
Serving Pinewood, FL - Our Local Coverage Area
We’re based in the Pinewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Replacement in Pinewood
Yes. Pinewood sits inside the High-Velocity Hurricane Zone, and every replacement window must be installed under a permit with the fenestration design pressure and large-missile rating on the drawings. We pull the permit, schedule the opening inspection, and close it out. Call (817) 686-2228 if you want the permit path handled from start to finish.
Sometimes. If the frame is square and solid, a sash-only replacement can work and costs less than full frame. But in Pinewood’s block construction, we often find the rough opening has shifted or the jamb has rot once the wall is opened. We tell you plainly if inserts will hold or if full frame is the only correct move. Estimates are free.
Impact windows with low-E glass reflect heat while letting light through, which reduces solar gain in Pinewood’s hot season. The effect is real but smaller than the wind mitigation premium credit, which averages around 25% on the windstorm portion after a wind-mitigation inspection. We match the SHGC and low-E spec to your insurer’s paperwork so the savings stack.
We are authorized for PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. For Pinewood’s HVHZ requirements, PGT and CGI get specified most often because their impact lines carry the right design pressure and large-missile certifications. We stock local parts for these brands, which keeps service calls moving.
Custom fabrication runs 4 to 6 weeks once the order is placed. Installation of standard-size units can be completed in as fast as a single day once they arrive. Full frame work on multiple openings runs longer. We set the schedule in writing before the order goes out, and we do not promise a date we cannot hit. Call (817) 686-2228 for a realistic timeline on your Pinewood project.
Written by Elliot Vance, Owner at Meridian Windows & Doors, serving Pinewood since the company’s founding in 2009.










Before
After
Before
After
Before
After