Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Window Replacement Across Dana Point
Window replacement in Dana Point typically runs $850 – $1,400 per window installed for a standard vinyl retrofit, while full-frame replacements with marine-grade hardware and coastal-rated glass land between $1,400 and $2,800 per opening. Most single-window jobs take one day; a whole-house replacement of ten to twelve windows usually wraps in two to three working days. Our crews know the corridors off Del Obispo, Pacific Coast Highway, and the hills above Capistrano Beach, and we schedule every Dana Point job with a written price before a single screw turns. Call (817) 686-2228 and we’ll scope your project over the phone in about fifteen minutes.

Why Meridian Windows & Doors Is Dana Point’s Preferred Window Replacement Company
Meridian Windows & Doors is the windows-and-doors specialist inside the Garrison Partners family, which means a local crew held to a written standard on every job, not a franchise name trading on a jingle. Homeowners in Dana Point call us because the commitment is specific: a written price delivered before work begins, a 365-Day Done Right Promise that covers every installation in writing, and background-checked, uniformed technicians who show up when they say they will. Elliot Vance runs the operation, and he set the rule early: if the work fails within a year, we come back at no charge. No phone tag, no subcontracted crew you’ve never met. Our Dana Point customers deal with the same scheduler in Los Angeles and the same install lead on site from first measurement to final caulk line. A meridian is a fixed line you measure everything against, and that’s how we run every Window Replacement job in this city.
Window Sash Replacement in Dana Point
Window sash replacement in Dana Point means pulling the moving panel, or sash, out of an existing frame and installing a new one, and it’s the fix we recommend most often when the frame is still square but the sash itself has failed. Along the coast, that failure usually shows up as corroded hardware, split corner joints, or glazing that’s gone hazy from delamination. A typical sash replacement here runs $350 – $650 per sash depending on glass spec and hardware, and it preserves your surrounding stucco and trim, which keeps a project to one day instead of three.
When a Sash Is Salvageable
If the frame shows no rot and the tracks are still true, replacing the sash alone gets you a sealed, operating window for roughly half the cost of a full-frame swap. We check the jamb pockets, the balance system, and the weatherstripping before we recommend this route. In Dana Point, that inspection is where we catch a lot of hidden salt damage before it spreads.
When the Frame Has to Go Too
Sometimes the sash failed because the frame was already compromised, corroded at the corners or soft behind the stucco from marine moisture. In that case, sash replacement is a band-aid. We’ll show you the evidence on site, in plain terms, and give you both numbers in writing so the decision is yours without pressure.
Window Glass Repair in Dana Point
Window glass repair in Dana Point brings up questions about insulated glass units, or IGUs, the sealed double-pane assemblies that fog or delaminate when the coastal air gets past a failing seal. When the seal goes, moisture forms between the panes, the low-E coating oxidizes, and the view turns milky. Repairing that correctly means replacing the IGU, not trying to dry it out, and it runs $250 – $550 per unit in this market depending on size and whether you need impact-rated glass for ocean-facing exposures.
Fogged, Hazy, or Delaminated Glass
Haze between panes is the most common call we get from Dana Point homeowners, especially on south and west elevations above the water. The interlayer in laminated glass fails after enough marine humidity and UV exposure, and once it goes, the glass has to come out. We can match most existing low-E tints and new IGUs the same week in most cases.
Cracked Single Pane on an Older Home
Neighborhoods like Lantern Village and the 1970s tracts off Stonehill Drive have plenty of original single-pane aluminum windows. A cracked pane there is usually a sign the whole unit is nearing replacement, but if the frame is sound we’ll replace just the glass and re-seal the sash, typically under $300 per pane.

Trusted Brands We Service in Dana Point
We’re authorized to install and replace products from PGT, CGI, CWS, ES Windows, and four other manufacturer lines, which matters in Dana Point because coastal conditions demand specific ratings, not whatever the distributor has in stock. PGT and CGI are our two most-specified brands here for their Miami-Dade-rated impact glazing and corrosion-resistant hardware. We keep Dana Point measurement data on file for repeat customers, and because we draw from eight lines, we can match an existing window’s profile or upgrade to a marine-spec unit without forcing you into one brand.
Common Window Replacement Problems We See in Dana Point Homes
- Salt corrosion on aluminum frames and hardware. The marine layer deposits fine salt on every exterior surface, and standard aluminum frames start pitting and binding within a few years. We spec stainless hardware and marine-grade finishes on every coastal install for this exact reason.
- Hidden rot behind stucco at the jamb. Wind-driven rain and marine moisture get behind poorly flashed windows and rot the rough opening before you see any sign inside. We find this on nearly every full-frame replacement in Dana Point homes built before 1990.
- Delaminated laminated glass on ocean-facing elevations. Constant UV and salt humidity break down the interlayer in lamination, leaving a clouded, milky window that kills the view and fails a wind mitigation inspection. It’s the most common reason homeowners think they need new glass when they actually need an upgraded IGU.
- Warped vinyl sashes on exposed south and west walls. Direct coastal sun and heat cycling warp cheap vinyl framing, which causes air leaks and binding. We replace those with reinforced vinyl or aluminum-clad options rated for high UV exposure.
Pricing for Window Replacement in Dana Point, CA
Budget realistically with these Dana Point market numbers: a standard vinyl insert replacement runs $850 – $1,400 per window installed, while a full-frame replacement with marine-grade components and low-E glass lands between $1,400 and $2,800 per opening. Moving a window to meet egress code, rebuilding a rotted rough opening, or upgrading to impact-rated PGT or CGI glazing pushes the top of that range. Smaller jobs: sash replacement $350 – $650, IGU glass replacement $250 – $550. What changes a price between estimate and installation? Rotted framing discovered when the old window comes out, code-required upgrades, or a homeowner changing glass spec after the order is in. We put the price in writing before work starts, and it does not move at the door. Call (817) 686-2228 for a free line-item estimate.
We Also Serve Cities Near Dana Point
Our crews cover the coastal and inland neighborhoods surrounding Dana Point, including San Juan Capistrano, Laguna Niguel, San Clemente, and Ladera Ranch. If you’re in one of those communities, the same written pricing and the same 365-Day Done Right Promise apply. We schedule by zip code, so call (817) 686-2228 and we’ll route you to the right crew.
Serving Dana Point, CA - Our Local Coverage Area
We’re based in the Dana Point area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Replacement in Dana Point
Yes, Dana Point requires a building permit for window replacement when you’re changing the size of the opening or going full-frame; retrofit, or insert, replacements into existing frames typically do not require one. The city will send an inspector to verify nailing fins, flashing, and egress before the job closes. We pull permits on any job that requires them and schedule the inspection so you don’t chase city hall. Call (817) 686-2228 and we’ll tell you in the first call whether your project triggers permitting.
PGT and CGI are the two brands we specify most often in Dana Point because both build impact-rated glazing and stainless hardware that survive salt air without pitting or binding. ES Windows also makes a quality marine-grade aluminum line for homeowners who want a slimmer frame. The right brand depends on your elevation, exposure, and whether you’re in a wind-borne debris zone, and we’ll spec it in writing before you spend a dollar.
One standard window takes about one working day from removal to final trim and caulk; a whole house of ten to twelve windows takes two to three working days. Coastal conditions can add time if we discover rotted framing or need to upgrade jambs for a heavier insulated glass unit, and that work gets written into the estimate before we start, never after. Call (817) 686-2228 and we’ll give you a calendar for your specific opening count.
Rotted rough framing hidden behind stucco, code-required egress upgrades, or a homeowner changing glass spec after ordering are the three things that move a price mid-project. We photograph every condition that changes scope and get written approval before proceeding, and any change is documented. That discipline is why Dana Point customers don’t get surprise invoices at the end.
Impact-rated windows from PGT or CGI often qualify for wind mitigation credits on your homeowner’s insurance in Dana Point, and upgrading from single-pane aluminum to low-E insulated glass typically cuts the solar heat gain through south and west walls enough to notice on your summer energy bill. We can’t quote your insurance discount, but we can give you the glass spec sheet your agent needs. Call (817) 686-2228 and we’ll walk you through what to request.
Written by Elliot Vance, Owner at Meridian Windows & Doors, serving Dana Point through the Garrison Partners network.










Before
After
Before
After
Before
After