Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Window Replacement Across Clovis
Window replacement in Clovis runs $450 – $1,300 per window for insert-style vinyl replacements, while full frame replacements in older ranch homes typically land between $900 – $2,100 per opening depending on size and the condition of the framing beneath. That’s the honest range we quote from before a single screw turns, because the price goes on paper up front and it does not move at the door. Our crews schedule Clovis jobs every week, we know the permit counter and the Title 24 energy code that governs this valley, and we answer the phone with a live person around the clock. Call (817) 686-2228 and we’ll scope it right the first time.

Key Takeaways:
- Most Clovis insert replacements run $450 – $1,300 installed; full frame work starts around $900 per opening.
- Clovis enforces California Title 24 energy code on window replacements, so glazing specs matter before you order.
- Every job gets a written price before work starts and a 365-Day Done Right Promise in writing.
- We pull the permit, schedule the inspection, and stand behind the work for a full year.
Why Meridian Windows & Doors Is Clovis’s Preferred Window Replacement Company
We’ve replaced windows in neighborhoods from the Old Town Clovis historic district off Pollasky Avenue to the newer tract developments east of Leonard Avenue and north of Shepherd. Our Window Replacement team has pulled Clovis permits, passed Title 24 inspections, and dealt with the stucco-and-wood jamb rot this valley’s heat cycling tends to produce in 1960s and 1970s ranch homes. Elliot Vance runs the crew with a simple rule: write the scope down, put the number on paper, and don’t ask for a change order unless the wall itself gives us a reason.
We’re part of the Garrison Partners family, held to The Garrison Standard since 2009. That means a background-checked, uniformed technician on every call and a written guarantee on every install. If it’s not done right, we make it right, free, within 365 days. Clovis homeowners who’ve had a no-show contractor or a quote that moved at the door tend to recognize the difference within the first conversation.
Window Pane Replacement in Clovis
Window pane replacement in Clovis usually means swapping the glass unit itself, not the whole frame. A failed pane, a crack from a stray baseball in Loma Vista, or a seal gone foggy between the panes: that’s a glass-only job. In Clovis, pane replacement typically runs $180 – $420 per pane including labor and the new insulated glass unit, depending on size and whether the sash is vinyl, wood, or old aluminum.
When a Pane Replacement Makes Sense
If the frame is square, the sash tracks clean, and the latch closes, replacing the pane keeps the job small. You keep your existing trim and stucco untouched. That’s the right call for a single broken pane or one failed thermal unit in a window that’s otherwise sound.
What a Pane Replacement Won’t Fix
It won’t correct a rotted jamb or a frame that’s pulling away from the house. If the frame moves when you push the sash, or you see daylight at the corners, a pane swap buys time but not a fix. In Clovis, where heat expands and contracts old aluminum frames for decades, that’s more common than homeowners expect.
Window Seal Repair in Clovis
Window seal repair in Clovis addresses the fogging and condensation you see between the two panes of an insulated glass unit, not a leak around the frame. A seal failure means the argon or krypton fill has escaped and outside air crept in. In Clovis, seal repairs typically run $150 – $350 per unit when the sash can be removed, the glass replaced, and the unit reset; if the sash is sealed into a non-removable frame, the job may require replacing the entire sash.
Signs Your Seal Has Failed
Fog that won’t wipe away, droplets between panes, or a greasy film on the interior glass surface. You’ll see it first on Clovis windows that get afternoon sun: west-facing bedrooms, living rooms, and any window without an overhang. The fog stays because the desiccant inside the unit is saturated.
Repair or Replace the Glass Unit?
For most Clovis homes, replacing just the insulated glass unit restores the window’s thermal performance at half the cost of a full window replacement. The frame stays, the glass comes out, and the new unit goes in with fresh sealant. If the sash itself is warped, you’ll need a new sash.

Trusted Brands We Service in Clovis
We’re authorized to install and replace products from PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. For Clovis homeowners, that matters because we can spec the right window for the San Joaquin Valley’s heat load instead of pushing whatever’s in stock. A west-facing room off Gettysburg Avenue needs different glazing than a north-facing bedroom off Minnewawa. If you’ve got an existing CGI or ES Windows line and need a pane or a sash matched, we can order from the manufacturer and keep your warranty intact. Local parts and factory-match glass are available for most brands without weeks of backorder.
Common Window Replacement Problems We See in Clovis Homes
- Title 24 non-compliance at final inspection. Homeowners or handymen swap glass without checking SHGC and U-factor ratings, then the Clovis inspector fails the job and the units have to be re-ordered. We spec to code before ordering so the final passes the first time.
- Hidden jamb and sill rot. 1960s and 1970s ranch and tract homes in Clovis often have wood framing behind the stucco that’s baked and cracked from decades of valley heat. Pull the old sash and you find rot that turns a quote into a repair line item. We flag this during the estimate, not after the wall is open.
- Non-standard rough openings. Older Clovis homes weren’t built to modern stock sizes. Ordering off-the-shelf windows means a reorder when the opening measures 33-1/4 inches instead of 34. We measure every opening before the order goes in.
- Failed seals on sun-baked glazing. The San Joaquin Valley’s triple-digit summer days break down insulated glass seals faster than coastal climates. Fog between panes is the most common call we get from Clovis homeowners in August and September.
Pricing for Window Replacement in Clovis, CA
Here’s the honest math for Clovis. Insert window replacements run $450 – $1,300 per window installed. Full frame replacement, where we pull the existing frame and reset the opening, starts around $900 per window and can reach $2,100 for larger openings, custom sizing, or rot repair. Pane-only replacements run $180 – $420. Seal repair runs $150 – $350. What moves the number: the condition of the frame, the glazing package (Title 24-compliant low-E with a lower SHGC costs more than stock glass), and whether the rough opening is standard. The price we write down before work starts is the price you pay, changes only if the wall gives us a documented reason, and we hand you the number in writing. Call (817) 686-2228 for a free estimate and we’ll scope the work on site.
We Also Serve Cities Near Clovis
Our crews cover Clovis and the surrounding Central Valley communities of Window Replacement in Clovis, Fresno, Sanger, Fowler, and Madera. Scheduling and dispatch are coordinated from our Fresno, Central Valley office, and the Clovis crew works locally. If you’re a few miles out, the estimate and pricing process is exactly the same.
Serving Clovis, CA - Our Local Coverage Area
We’re based in the Clovis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Replacement in Clovis
Yes. The City of Clovis requires a permit for window replacement, and every replacement must meet California’s Title 24 energy code. We pull the permit on your behalf, spec the glazing to code before ordering, and schedule the final inspection. Skipping the permit risks a failed final and a reorder. Call (817) 686-2228 and we’ll handle the paperwork as part of the job.
Three things: hidden rot behind the stucco or trim, non-standard rough openings that require custom sizing, and any framing repair the inspector requires before the new unit can be set. We document each with photos and walk you through the line item before proceeding. The price doesn’t move at the door; if it changes, you see the reason and approve it first. Estimates are free, (817) 686-2228.
Most Clovis window replacement jobs run 3 – 5 weeks from signed contract to inspection sign-off. Custom-sized units add 2 – 4 weeks. Permitting and inspection scheduling account for roughly a week of that timeline. We’ll give you a written schedule at the quote, and we don’t pad it to string you along.
West-facing windows in Clovis take the full brunt of the San Joaquin Valley afternoon heat. You want low-E glass (a thin coating that reflects heat while letting light through) with a low SHGC rating, ideally 0.25 or lower for Title 24 compliance. Laminated glass interlayer adds noise reduction and heat rejection. We’ll spec the exact package based on the orientation and wall area, then price it in writing.
Yes, in most cases. If the sash is removable and the frame is sound, we replace the insulated glass unit and reseal it for $150 – $350 per window. That fixes the fog and restores the thermal barrier without replacing the frame. If the sash itself is warped or the frame has rot, a full replacement is the honest answer. Call (817) 686-2228 and we’ll tell you which one you’re dealing with.
Meridian Windows & Doors serves Clovis with written pricing, Title 24-compliant glazing, and a one-year written guarantee on every job. Call (817) 686-2228 to schedule your free estimate, and we’ll put the scope and the number on paper before any work starts.
Written by Elliot Vance, Owner at Meridian Windows & Doors, serving Clovis since the Garrison Standard began in 2009.










Before
After
Before
After
Before
After