Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Window Installation Across Irwindale
Window installation in Irwindale runs $650 – $2,400 per opening for most retrofit work, and a full-home replacement of eight to twelve windows on a 1960s ranch typically lands between $8,000 and $18,000 depending on the frame material, glass package, and whether lead-safe containment applies. That is the honest range before anyone steps foot on your property. We scope every Irwindale job the same way: measure the rough opening, check the framing, confirm the permit path, and put the full price in writing before any work begins. Call (817) 686-2228 and a live person answers, day or night.

Our Window Installation team works across Irwindale from the quarry-belt neighborhoods north of the 210 to the industrial-adjacent streets near Live Oak Avenue. We know which homes were built before 1978 and what that means for lead paint rules. We know which west-facing walls bake in the afternoon and where low-E glass pays for itself fastest. That local knowledge changes the way we scope a job, and it should.
Why Meridian Windows & Doors Is Irwindale’s Preferred Window Installation Company
We are the windows-and-doors division of the Garrison Partners family, operating to The Garrison Standard since 2009. What that means in plain terms for an Irwindale homeowner: a written price before work starts, a background-checked uniformed technician on every call, and a 365-Day Done Right Promise on paper. If the install fails within a year, we come back at no charge. No fine print about labor exclusions. That is the whole guarantee.
Elliot Vance runs our operation, and he holds every crew to the same rule: the customer gets the straight story, the real number, and the right window for the opening, not the window that happens to be in the warehouse. We stock eight manufacturer lines including PGT, CGI, and CWS, so a mid-century Irwindale home with settled framing gets a custom-sized unit, not a stock box that leaves a half-inch gap and a sloppy caulk line.
Irwindale homeowners call us because they have been burned before. A contractor quoted one number and billed another. A crew no-showed twice. A sill was left unflashed and rotted out the sheathing. We run on discipline: the price goes on paper, the crew shows up in uniform, and the work is covered in writing for a full year. When you call (817) 686-2228, a person picks up on the first ring and schedules your free estimate.
Bay Window Installation in Irwindale
Bay window installation in Irwindale is a deliberate structural project, not a quick swap. A four-panel bay with a fixed center picture unit and two flanking casements on a 1960s home off Arrow Highway typically runs $2,800 – $6,500 installed, depending on the seat board condition, the roofline, and whether the existing header needs reinforcement. We start by checking the rough opening and the cantilever support underneath, because a bay built on a rotted seat board will sag within two years no matter how good the glass is.
Most Irwindale bays fail in predictable ways: the old aluminum frame channel holds water, the wood seat board rots at the outer corners, and the operator hardware seizes from years of San Gabriel Valley sun and quarry dust. We walk you through exactly what we found before we quote, and we give you the number in writing before any work begins.
What the Job Actually Involves
We remove the old unit, repair or replace the seat board and knee braces, flash the rough opening with self-adhered membrane at the sill and jambs, then set the new bay with a continuous top flashing tied into the house wrap. On a pre-1978 Irwindale home, we run a lead-paint test on the window jambs first and follow EPA Renovation, Repair and Painting rules if the test comes back positive. No shortcuts.
When a Homeowner Needs It
You need a bay replacement when the glass fogs, the side vents no longer close tight, or the exterior trim shows soft rot at the corners. You want it when the room feels like an oven every afternoon and the old single-pane glass lets heat pour in from the west-facing exposure. The right bay with low-E glass turns that problem around and adds usable floor space at the same time.
Window Contractor in Irwindale
A window contractor in Irwindale has to handle two things at once: the installation itself, and the local rules that govern it. We do both. As a licensed, insured contractor, we handle the permit paperwork for Irwindale’s building department, coordinate any required inspections, and keep the job moving. The cost for a typical contractor-managed single-window replacement runs $650 – $1,400 for a standard retrofit, while a full-frame replacement on a settled opening runs $1,200 – $2,400 per unit.
We will not fake a clean opening. Older Irwindale tracts, especially the 1950s and 1960s single-story streets near Arrow Highway and the Irwindale Speedway, have framing that shifts over decades. A stock-size window charted off an old plan might leave a quarter-inch gap on the right jamb. We measure every opening with the trim off, and we order the unit to the actual dimensions, not the nominal size on the box.

The Garrison Code on the Job Site
Our crews follow The Garrison Code on every Irwindale job: show up on time, lay drop cloths, keep the work area sealed, and clean up at the end of the day. We do not leave old sashes in the yard or glass shards in the flower bed. A meridian is a fixed line you measure everything against. That is what the name means and how we run every install.
Free Estimate, Clear Scope
Call (817) 686-2228 and we will schedule a time to walk the property, measure the openings, and hand you a written line-item quote. You will see the cost of the window, the labor, the flashing, the permit, and the haul-off, all broken out. No round numbers on a napkin.
Trusted Brands We Service in Irwindale
We install and replace windows from eight manufacturer lines, which means we are not trying to force one brand into a job it does not fit. For Irwindale homes with west-facing exposures and serious afternoon sun, we often spec PGT casement units with low-E glass. For coastal-adjacent or high-wind areas near the hills, CGI impact-rated units make sense. CWS vertical sliders work well in the older ranch homes where the original aluminum frames need a clean retrofit. Because we stock parts locally for Irwindale jobs, turnaround on common hardware like balances and latches is fast. The right window is the one that matches your opening, your exposure, and your budget, and we carry enough lines to make that an honest match.
Common Window Installation Problems We See in Irwindale Homes
- Pre-1978 lead paint on window jambs. Irwindale has a large stock of housing built in the 1950s and 1960s, and any window that disturbs painted surfaces on those homes falls under EPA RRP rules. Skipping the lead-safe protocol can stop the job mid-install and add unplanned containment and disposal costs.
- Shifted framing in older tracts. Homes off Arrow Highway and near the 210 corridor have been through decades of heat cycles, and rough openings that measure 71.5 inches on one side can measure 71.75 on the other. Off-the-shelf sizes often will not seat without jamb extensions or a custom-sized unit.
- SCAQMD dust and debris complaints. Irwindale sits within the South Coast Air Quality Management District. Cutting stucco or drywall during demolition without proper containment can trigger a site complaint and a re-inspection delay. We contain every cut with a shop vacuum and encapsulation, per SCAQMD rules.
- Failed aluminum sliders on west-facing walls. The original aluminum frames from the 1960s and 1970s lose their thermal break over time, and the track rollers seize with San Gabriel Valley grit. Homeowners report rooms that will not cool and windows that will not open. A replacement with low-E insulated glass solves both.
Pricing for Window Installation in Irwindale, CA
Here is the honest cost picture for Irwindale. A standard single-window retrofit runs $650 – $1,400 installed. A full-frame replacement runs $1,200 – $2,400 per unit. Bay and bow windows run $2,800 – $6,500. Garden windows run $1,800 – $3,400. What drives the number up: lead-safe containment on pre-1978 homes, custom sizing for shifted framing, stucco repair around the opening, and any rotted framing that must be rebuilt before the new unit seats. What drives it down: multiple windows done in one visit, standard-size openings, and retrofit installs where the existing frame is solid. The price we give you is written down before any work starts and it does not move at the door. Call (817) 686-2228 for a free estimate with no pressure and no change-order surprises.
We Also Serve Cities Near Irwindale
Our crews cover the wider Southern California metro from Irwindale outward. If you are in Los Angeles, San Diego, San Jose, or San Francisco, we can schedule a free estimate in your area. Same written pricing, same 365-Day Done Right Promise, same live-person phone line. Call (817) 686-2228 and tell us where the project is.
Serving Irwindale, CA - Our Local Coverage Area
We’re based in the Irwindale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Installation in Irwindale
Yes, most window replacements in Irwindale require a building permit, especially if the opening is being altered, the frame is being replaced, or the home falls under pre-1978 lead-paint rules. We pull the permit, schedule the inspection, and close everything out. No permit shortcuts and no unpermitted crew work. Call (817) 686-2228 to get the permit path scoped for your specific project.
Low-E glass has a thin metallic coating that reflects infrared heat while letting visible light through. In Irwindale, where summer afternoons regularly push into the high 90s, that coating cuts the heat gain through west-facing windows by a measurable margin, and many homeowners report a 10 – 20% difference in cooling load on those rooms. We can show you the solar heat gain coefficient on any glass package we quote.
Yes, and we do it regularly. The key is running a lead-paint test on the window jambs and surrounding trim before any demolition starts. If the test comes back positive, we follow EPA Renovation, Repair and Painting rules: plastic containment, HEPA vacuuming, and proper disposal. The work scopes slightly higher because of the added containment steps, but the install itself is the same. Call (817) 686-2228 and we will walk you through the exact process for your home.
A single-window retrofit on a standard opening takes our crew about two to four hours, including trim and cleanup. A full-frame replacement takes most of a day. A full-home replacement of eight to twelve windows typically runs three to five working days, longer if lead-safe containment applies or if we have to rebuild rotted framing. We give you a written schedule before work starts and we hit it. Call (817) 686-2228 for a timeline on your specific property.
The honest answer: hidden framing rot, a positive lead-paint test on a pre-1978 home, or an opening that measures out of square and requires custom sizing or jamb extensions. Those are the three most common change-order triggers we see in Irwindale, and we scope for all of them before work starts so the number we write down is the number you pay. If we find something we could not see during the estimate, we stop, show you the issue, and get your written approval before any additional work. No surprise line items at the end.
Written by Elliot Vance, Owner at Meridian Windows & Doors, serving Irwindale and the surrounding San Gabriel Valley.










Before
After
Before
After
Before
After