Window Installation in Davie - Written Price Before Anything Is Ordered

Fast, Reliable Window Installation Across Davie

Window installation in Davie runs $800 – $1,500 per impact-rated window installed, with whole-home packages starting around $8,000 and large custom openings reaching $5,000 each. Most Davie homes fall inside the High-Velocity Hurricane Zone, which means the right glass, the right frame anchoring, and the right permit paperwork are not optional extras. We’re Meridian Windows & Doors, and our Window Installation team works Davie neighborhoods from Forest Ridge to Shenandoah with written pricing delivered before any work starts. Call (817) 686-2228 for a free in-home measure and a line-item quote you can hold us to.

Call (817) 686-2228

Why Meridian Windows & Doors Is Davie’s Preferred Window Installation Company

We show up when we say we will, and we put the price on paper before a single screw turns. Davie homeowners tell us the same story across every neighborhood from Harmony Lakes to Rolling Hills: a previous contractor quoted one number over the phone, discovered rotted jambs or non-compliant glass during the job, and handed over a change order. That does not happen on our watch. Led by Elliot Vance, our crews are background-checked and uniformed, so you know exactly who walks through the door on Griffin Road or Stirling Road.

We’re part of the Garrison Partners family, held to The Garrison Standard since 2009. That means every installation carries a written 365-Day Done Right Promise. If the work fails within that full year, we come back at no charge. No fine print about labor exclusions. No second-guessing. Davie’s mix of 1970s ranch stock and newer infill construction means we see install conditions on one street that would never appear on the next one over. That’s why we measure every opening, inspect every jamb, and write the scope before we quote the number.

Double Hung Windows in Davie

Double hung windows in Davie typically run $900 – $1,800 per impact-rated unit installed, depending on opening size and whether you need full-frame replacement or a retrofit insert. These are the windows with two sashes that slide vertically, and they are the most common replacement we spec in Davie’s older ranch homes. Both sashes tilt in for cleaning, which matters when your windows face a canal or a horse pasture and attract more than their share of South Florida dust.

Retrofit inserts for older ranch stock

Most Davie homes built between 1970 and 1990 have single-pane aluminum frames that are now pitted, leaking, and out of square. A retrofit insert fits a new window inside the existing jamb, which keeps stucco work to a minimum and holds the price down. The catch is jamb condition. If the original frame has rotted at the sill or shifted enough to break the seal, we reframe. That changes the scope, and we tell you before you sign, not after the crew opens the wall.

When double hung beats casement windows

If your Davie home sits under oak canopy in Forest Ridge or Shenandoah, double hung windows give you ventilation without a crank mechanism projecting into a walkway. They also let you open the top sash to vent warm air while keeping the bottom closed, which helps in homes where afternoon sun hits the west elevation hard. The tradeoff is a slightly lower design pressure rating than a casement window at the same size, which is why we always match the unit to the opening’s wind zone, not to what is in stock.

Vinyl Windows in Davie

Vinyl windows in Davie run $900 – $1,800 per impact-rated unit installed. Vinyl is the frame material, and it carries real advantages in South Florida: it does not corrode in salt air, it does not sweat like aluminum in Davie’s humid summer months, and it insulates better against the heat that sits over western Broward County from June through September. Nearly all of our Davie installations use vinyl frames, including PGT and ViewLux impact lines.

Why vinyl outperforms aluminum here

Davie’s afternoon storm pattern is consistent: heat builds all day, storms roll in around 3 p.m., and humidity spikes right after. Aluminum frames conduct that heat straight into the house. Vinyl frames have multiple air chambers that slow heat transfer, which keeps the indoor temperature more stable and reduces the load on your AC. It also means less condensation at the sill when the temperature swings, which is a common complaint in older Davie ranches with single-pane aluminum.

Frame color and stucco integration

Vinyl windows in Davie generally come in white or tan extrusions, and we match the color to the home’s existing stucco and trim. On retrofit inserts, the exterior flange tucks behind the stucco edge, then we apply exterior-grade sealant at the sill and head. This is the step most bidders skip, and it is the step that determines whether water finds its way behind the jamb when the first heavy August storm hits. We do it on every opening, every time.

Trusted Brands We Service in Davie

We install and replace products from eight manufacturer lines, including PGT, CGI, and ViewLux. For Davie specifically, we keep a strong working inventory of PGT impact units because their Miami-Dade NOA product approvals match what Davie’s building department expects to see on permit paperwork. Every unit we install carries a Florida Product Approval or Miami-Dade NOA label, and we document that for your insurance wind-mitigation inspection. When a Davie homeowner asks us to spec a window, we pick the product that fits the opening, the wind zone, and the budget. Not the one sitting in a warehouse.

Common Window Installation Problems We See in Davie Homes

• Rotted or out-of-square jambs on 1970s ranches. We see this constantly off Griffin Road and Stirling Road. A quote that assumes a clean retrofit turns into a reframe the moment the old aluminum comes out, and that changes the price. We inspect jambs before we quote, so the number you sign is the number you pay.
• Non-HVHZ units sold as impact-rated. Davie sits in the High-Velocity Hurricane Zone. A window without Florida Product Approval or a Miami-Dade NOA cannot be permitted as impact-rated and will not pass Davie’s inspection. We only install units that carry the correct approval labels for your specific opening.
• Unflashed sills and cracked stucco on retrofit inserts. Davie’s daily afternoon rain finds every gap. If the old sill had cracked stucco or the original flashing failed, water gets behind the frame and rots the jamb from inside. We repair and seal before we trim, and we line-item it on the quote so it is not a surprise.
• Design pressure ratings that don’t match the opening. A double hung window on a ground-floor canal lot in Harmony Lakes may need a different design pressure than the same window on a second-floor gable in Shenandoah. We read the wind zone from the permit drawings and match the unit to the required PSF rating. Ratings never exceed +/-100 PSF because that is the standard ceiling for window assemblies.

Pricing for Window Installation in Davie, FL

What Window Installation Costs in Davie

The figures above are real ranges we quote in Davie, not marketing numbers. Impact windows run $800 – $1,500 per opening because every unit must carry Florida Product Approval or a Miami-Dade NOA, which means rated glass, reinforced frames, and anchoring that meets High-Velocity Hurricane Zone code. Custom fabrication runs 4 – 6 weeks, so a realistic project calendar from signed contract to final inspection is usually six to eight weeks. Once the units arrive at our South Florida office, an installation crew that serves Davie locally can typically install the windows in as fast as a single day, depending on the number of openings and whether any stucco repair is needed.

If you are comparing bids, the number to watch is the retrofit scope. We replaced fourteen original single-pane aluminum sliders and fixed windows on a 1978 ranch off Griffin Road in Davie with PGT impact-rated vinyl double-hung and casement units, swapping the old aluminum jamb frames for properly flashed retrofit inserts. The homeowner had two windows where the original stucco had cracked at the sill, so we added exterior sealant and touch-up before trim, a line item most bidders miss. Post-install, every opening carried a Miami-Dade NOA product approval label, which the homeowner submitted for their wind mitigation discount. That is the difference between a quote that holds and one that blows up mid-job.

Florida Pays You Back

Davie homeowners have access to a stack of incentives that meaningfully offset the cost of impact windows. The My Safe Florida Home program offers matching grants up to $10,000 for qualifying wind-mitigation upgrades, including impact-rated windows and doors, for eligible homes that pass a wind-mitigation inspection. Florida also exempts impact-resistant windows and doors from sales tax. At the federal level, the 25C energy credit covers 30% of the product cost, up to $600 per year, on qualifying low-E units. After installation, a wind-mitigation inspection ($75 – $150) typically results in a windstorm premium credit averaging around 25% on the windstorm portion of your policy. Programs and carriers set the final numbers, so we never quote a guaranteed savings figure. We do provide the approved product documentation your inspector needs.

One honest comparison worth making: impact windows versus hurricane shutters. Shutters require you to be home when the storm approaches, and they take time to hang on every opening. Impact windows protect the home permanently. You do not panel up before a storm. You do not drill anchors into stucco. The window is the protection. We never sell or install shutters, but the comparison matters if you are weighing both options.

On ratings: every window we install in Davie is matched to the design pressure required for that specific opening. That pressure is a PSF rating and it never exceeds +/-100, which is the ceiling for window assemblies under Florida Building Code. When you see a wind speed figure like 140 or 170 mph on a product sheet, that is the wind zone rating, not a design pressure. We spec units to the building department’s wind maps for your address, and we put the compliance label on the permit drawings so the inspection clears the first time.

We Also Serve Cities Near Davie

Our crews serve Davie and the surrounding Broward and Miami-Dade communities. If you’re in Davie or a neighboring city including Miami, Hialeah, Fort Lauderdale, or Pembroke Pines, the same written pricing and 365-Day Done Right Promise applies. Call (817) 686-2228 to schedule your free measure anywhere in the area.

FAQs About Window Installation in Davie

Our Approach: The Garrison Code on Every Davie Job

The Garrison Code is the standard we hold ourselves to on every installation in Davie. It means the price goes on paper before work begins and does not move at the door. It means background-checked, uniformed technicians who introduce themselves by name. It means we pull the permit, we schedule the inspection, and we stay until it passes. If something fails within 365 days, we come back at no charge. That guarantee is written on every contract. A meridian is a fixed line you measure everything against. That is what the name means and how we run every install from Forest Ridge to Shenandoah.

Elliot Vance leads our team, and the standard he sets is simple: do the job the way you would want it done on your own house. We answer the phone with a live person around the clock, every day of the year. No voicemail loops. No next-business-day callbacks. If you’re ready to get real numbers for your Davie windows, call (817) 686-2228 now.

Written by Elliot Vance, Owner at Meridian Windows & Doors, serving Davie since 2009.