Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Window Installation Across Colton
Window installation in Colton runs $650 – $1,850 per opening for most retrofit replacements, and $900 – $2,400 for full-frame tear-outs, depending on glass makeup and design pressure rating. We’re Meridian Windows & Doors, and we’ve worked enough Colton homes to know the difference a correctly spec’d window makes on Valley Boulevard versus a side street off Washington. The quote goes on paper before any work starts, and it doesn’t move at the door. If you’re replacing windows anywhere in Colton, call (817) 686-2228 for a free estimate.

Why Meridian Windows & Doors Is Colton’s Preferred Window Installation Company
Colton homeowners tell us the same thing over and over: another contractor quoted one number, showed up late, and left caulk smeared across the sill. That doesn’t happen with us. Every Meridian job runs under The Garrison Code, which means a written price before work begins, a clean job site at the end of the day, and a background-checked, uniformed crew on every visit. We don’t leave a window install until the trim lines are straight and the sash opens with one hand.
We’re part of the Garrison Partners family, held to The Garrison Standard since 2009. What that means for a homeowner off Rancho Avenue or near the 10: the 365-Day Done Right Promise applies to every installation in writing. If the work fails within that first year, we come back at no charge. That’s the full guarantee term, not a partial one with labor exclusions. A meridian is a fixed line you measure everything against. That’s how we run every install in Colton.
We’ve handled window replacements in a wide range of Colton housing stock, from 1950s stucco ranchers to newer two-story builds near Loma Linda’s border. We know where the city requires permits, what the inspector at Colton City Hall looks for, and how Santa Ana wind exposure changes the glass and frame spec. That local knowledge keeps the job moving instead of hung up on a correction notice.
Casement Windows in Colton
Casement windows in Colton are a common upgrade for bedrooms and kitchens where a crank-out sash gives you full ventilation and a tight seal against the afternoon heat. A casement replacement typically runs $700 – $1,900 installed in Colton, depending on size and whether you need a laminated glass interlayer for wind-driven debris or street noise. Most Colton homes we see have horizontal sliders, but casements outperform them on west-facing walls where the seal has to hold against sustained Santa Ana gusts.
What Makes Casements Worth It Here
Colton’s wind exposure means casements earn their keep. The sash presses into the weatherstripping when closed, so the seal gets tighter as wind pushes on it. That matters on a house off Mount Vernon Avenue where the southwest side takes the gusts. We order ours with multi-point locking hardware as standard, which also tightens the seal along the full jamb.
Good Fits and Wrong Fits
Casements work well in kitchens over a counter, in egress bedrooms, and anywhere you want to open up on a cool morning. They’re a poor fit for walkways or patios where the cranked sash would swing into the path. We’ll tell you honestly if a double-hung or slider is the better move for a given opening in your Colton home.
Double Hung Windows in Colton
Double hung windows in Colton are the workhorse replacement for older ranch homes with the original wood sashes rotted out from decades of Inland Empire sun. A standard double-hung replacement runs $600 – $1,600 per window in Colton, with the price driven by glass package and whether the opening needs a new frame. The two moving sashes mean you can ventilate from the top or bottom, and both sashes tilt in for cleaning, which matters on a second story off Grand Terrace Road.
Why Colton’s Older Homes Need Them
Colton has a large stock of 1950s and 1960s homes where the original windows were single-pane aluminum or wood with no thermal break. Those frames conduct heat into the wall cavity all summer. A double-hung with a low-E coating and insulated glass cuts that heat transfer noticeably, and the tilt-in feature means a homeowner can keep the upper sash clean without a ladder.

Double Hung vs. Other Styles
Double hungs make sense when you want the traditional look and top-and-bottom airflow on a home near Reche Canyon or along the 215 corridor. They cost slightly more than a single-hung because both sashes operate, but for Colton’s housing mix and resale expectations, they’re the most common spec we write.
Trusted Brands We Service in Colton
We’re authorized to install and replace products from eight manufacturer lines, which lets us spec the right window for a specific Colton exposure instead of pushing whatever happens to be in stock. For wind corridor homes, we lean on CGI and PGT for higher design pressure ratings and laminated glass interlayers. For standard retrofit work in quieter neighborhoods near La Cadena Drive, CWS and ES Windows cover the middle of the price range with solid low-E packages. We keep Colton-relevant sizes and hardware in local inventory, which shortens lead times when a unit arrives damaged or a measurement needs a quick correction before reorder.
Common Window Installation Problems We See in Colton Homes
- Clear glass on south and west exposures. Colton’s afternoon sun is brutal from May through September. Standard clear glass on a west-facing wall turns the room into an oven and sends the cooling bill up. We spec low-E glass with a low solar heat gain coefficient on those walls, or the homeowner is uncomfortable and angry by August.
- Underspec’d design pressure ratings. Colton sits in a Santa Ana wind corridor, and a window rated for a calmer Inland Empire city will deflect and leak under sustained gusts. This is most visible on elevated or two-story exposures along the wind path.
- Missing sill pans on stucco homes. A lot of Colton homes are stucco over frame. When a replacement reuses the old jamb without adding a sill pan or back-dam, any water that gets past the seal soaks the framing instead of draining out. We add a sill pan at every opening, no exceptions.
- Reusing rotted subsills. Older Colton homes often have dry rot at the sill from decades of sprinkler overspray or failed caulking. We inspect the subsill before the new unit goes in and replace the rotted section. Burying a new window over bad wood just guarantees the seal fails early.
Pricing for Window Installation in Colton, CA
Retrofit replacements in Colton, where the new unit fits inside the existing frame, run $600 – $1,600 per window for standard sizes. Full-frame tear-outs, where we remove the old jamb, add a new sill pan, and flash the opening, run $900 – $2,400 per opening. Casements and bay or bow assemblies land at the top of that range. The main cost drivers in Colton are design pressure rating (Santa Ana exposure pushes this up), glass package (laminated interlayers and low-E coatings add $150 – $400 per window), and whether the opening needs frame repair once the old window comes out. We write the price on paper before work starts, and it doesn’t move unless you change the scope. Call (817) 686-2228 for a free estimate on your specific windows.
We Also Serve Cities Near Colton
Our crews serve Colton and the surrounding Inland Empire communities. If you’re in Colton, Grand Terrace, Loma Linda, Riverside, or San Bernardino, the same written-price guarantee and 365-Day Done Right Promise apply. Dispatch and scheduling are coordinated from our Inland Empire office, and crews serve Colton locally. Call (817) 686-2228 and we’ll get your estimate on the calendar.
Serving Colton, CA - Our Local Coverage Area
We’re based in the Colton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Installation in Colton
Yes, Colton requires a building permit for window replacement when the opening size changes or the work moves beyond a like-for-like retrofit, and the city inspector verifies that the installed unit meets current energy code and that flashing and anchorage are correct. On a full-frame replacement, the inspector checks the nailing fin or screw pattern, the sill pan, and the weather-resistive barrier integration. For simple retrofit jobs where the existing frame stays untouched, the permit path is usually lighter. We pull the permit ourselves, schedule the inspection, and make sure it passes. Call (817) 686-2228 and we’ll walk you through what applies to your specific job.
Colton’s Santa Ana wind exposure often pushes the design pressure rating up a class, which means a sturdier frame and sometimes a laminated glass interlayer, and that adds real cost over a calmer city like Loma Linda. The energy code requirements in Colton also drive low-E glass with a lower solar heat gain coefficient on south- and west-facing walls, which is a worthwhile upcharge but an upcharge nonetheless. And Colton’s stucco-heavy housing stock means more full-frame work where the old jamb has to come out. The honest answer is that a Colton quote is pricing the real conditions of the site. Call (817) 686-2228 for an itemized quote and we’ll show you exactly where the dollars go.
The two things that move a written price are rotted framing discovered after the old window comes out, which has to be repaired before the new unit goes in, and a change in the glass or frame spec that you request mid-project. Both get documented in writing before we do the extra work, and you approve the number before we proceed. That’s the difference between us and a contractor who just adds a line item at the end. The 365-Day Done Right Promise stays in force on the full job. Call (817) 686-2228 to get your exact scope priced out.
No, and we don’t pretend otherwise. Planned window replacement requires measuring, ordering units cut to the opening, waiting for the glass to be fabricated, pulling the permit, and scheduling the crew and the inspection. That’s a multi-day or multi-week sequence, not a same-day operation. If a window is broken and the opening can’t be secured, we can board it and order a replacement on a normal lead time. For a planned replacement, the honest answer is to get on the schedule and do it right. Call (817) 686-2228 and we’ll give you a realistic calendar for your project.
They can, on a home where the current windows are single-pane aluminum or failed wood with air leaks, and where the new spec uses low-E glass with a low solar heat gain coefficient on the south and west walls. Colton’s summer afternoons push attic and wall temperatures hard, and windows are a big part of that heat gain. We replaced eleven single-pane aluminum sliders and fixed units in a 1960s ranch house off Valley Boulevard near Colton High School with CGI double-hungs and a sliding door, specifying low-E with a laminated interlayer. The homeowner’s west-facing living room had hit 88 degrees on July afternoons; after the swap, they reported a more comfortable room and a quieter front of the house. The window doesn’t eliminate the cooling load, but it changes the comfort math. Call (817) 686-2228 for an estimate on your specific home.
Written by Elliot Vance, Owner at Meridian Windows & Doors, serving Colton and the Inland Empire since 2009.










Before
After
Before
After
Before
After