Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Patio Door Installation Across Millbrae
Patio door installation in Millbrae typically runs $2,800 – $6,400 for a mid-range sliding or French unit, with most jobs completed in one to three days once the door is on site. The number that matters more than the door itself is what the opening looks like once we pull the trim. Millbrae’s mix of mid-century ranchers and 1980s – 90s production homes means we see everything from clean panel swaps to full jamb reconstruction within a few blocks of each other. Call (817) 686-2228 and we’ll scope it honestly before any work is scheduled.

Meridian Windows & Doors is the windows-and-doors specialist within the Garrison Partners family. We do Patio Door Installation the way it should be done: written price first, crew that shows up, work covered in writing for 365 days. If it’s not done right, we come back at no charge.
Why Meridian Windows & Doors Is Millbrae’s Preferred Patio Door Installation Company
Millbrae homeowners have dealt with enough no-show contractors and door-to-door pricing games to recognize the difference between a sales pitch and a straight answer. Our crews work Millbrae regularly. We know the housing stock off El Camino, the newer production builds up toward the hills, and the marine-air exposure that changes what a patio door actually needs to hold up.
Elliot Vance leads our Millbrae work. Every job gets a written price before a single screw turns, and that price does not move at the door. No surprise line items, no last-minute upcharges. Our technicians are background-checked and uniformed, so when someone walks up your driveway, you know exactly who they are and why they’re there.
We’re held to The Garrison Standard, which has governed how we operate since 2009. That means showing up as promised, pricing honestly, and backing the work with a 365-Day Done Right Promise. If an installation fails within that year, the crew returns at no charge. No fine print about labor exclusions.
Patio Door Repair in Millbrae
Patio Door Repair in Millbrae usually runs $180 – $550 for track cleaning, roller replacement, or sash realignment, and $650 – $1,400 when the jamb or sill needs structural work. Most repairs take two to five hours. The first thing we check on every Millbrae repair call is whether the problem is the door or the opening behind it.
A pitted aluminum track near the Bay is common. Wind-driven marine moisture gets pushed against the frame, the track corrodes, the rollers wear out, and the panel starts binding. That’s a repair when the frame is still sound. It becomes a replacement when the jamb is soft or the track has lost its integrity.
Track and Roller Work
When a sliding door drags or sticks, it’s usually worn rollers riding on a fouled track. We pull the panel, clean or replace the track, and install new rollers rated for the panel weight. In Millbrae, we see this most often on 1990s aluminum sliders that have spent two decades facing bay air.
Jamb and Sill Repair
Soft wood at the jamb or sill gets misdiagnosed as a door problem all the time. The leak actually starts where water gets behind the trim and sits against the framing. We sister the damaged member, flash the sill properly, and set the door back so water drains away from the opening instead of into it.
Sliding Door Repair in Millbrae
Sliding Door Repair in Millbrae costs $150 – $400 for routine service like roller swaps and track cleaning, and $500 – $1,200 when the work involves re-shimming the frame or replacing a damaged threshold. Most sliding door repairs are done in one visit.
Millbrae’s bay-facing homes put sliding doors under real pressure. Wind pushes rain against the panel, and the constant moisture cycle corrodes hardware faster than you’d see in a drier inland city. When the sash no longer seals and you can feel air moving through the closed door, the fix is rarely just weatherstripping.

Alignment and Weather Seal Work
A sliding door that’s out of square won’t seal, no matter how much new weatherstripping you add. We re-level the frame, adjust the rollers, and replace the seal so the panel seats flush. This is the most common sliding door fix we perform in Millbrae.
Track and Threshold Replacement
When the track is too far gone for cleaning and the threshold has corroded or rotted, we replace both. We set the new threshold on a flashed sill so water drains outward. That’s the detail that keeps the job from failing again in two winters.
Trusted Brands We Service in Millbrae
We’re authorized to install and replace products from PGT, CGI, and ViewLux, among eight manufacturer lines we carry. For Millbrae’s marine exposure, we often spec PGT or CGI impact-rated glazing, and ViewLux for clean, narrow-frame sightlines. Because we draw from a full portfolio rather than a single brand in stock, the door gets matched to the exposure and the opening. Parts availability for Millbrae jobs is rarely a delay; if a component is needed, we source it directly through the manufacturer line.
Common Patio Door Installation Problems We See in Millbrae Homes
- Pitted aluminum tracks on bay-facing doors. Marine moisture driven by wind corrodes the track over a decade or two. The panel binds, the sash won’t seal, and the track eventually fails. Replacement tracks are sometimes salvageable; corroded frames usually are not.
- Soft jamb and sill rot hidden behind trim. We’ve opened walls on 1980s production homes near the Bay where the trim looked fine from the outside. The structural member behind it was soft and dark from years of slow moisture intrusion. That rot is the real cost driver on many Millbrae jobs.
- Wrong glass for the exposure. A standard clear insulated glass unit on a bay-facing patio door leaves the room cold and the efficiency numbers poor. Low-E and impact-rated glazing are the right spec for Millbrae’s wind and marine air, and the cost difference is worth it over the door’s life.
- Failed seals and cloudy glass in older units. We see it constantly in mid-century ranchers near El Camino. The original single-pane sliders are long gone, but the 1990s replacements have now hit end-of-life. Cloudy glass means the seal has failed; the thermal performance is gone.
Pricing for Patio Door Installation in Millbrae, CA
Here are honest ranges for Millbrae, based on the work we’ve actually completed here:
- Sliding patio door replacement (mid-range vinyl or aluminum, low-E glass): $2,800 – $4,200 installed
- French patio door replacement (in-swing, wood or fiberglass): $3,800 – $6,400 installed
- Impact-rated glazing upgrade (PGT or CGI): add $800 – $1,600 depending on size and panel count
- Full-frame replacement with jamb or sill repair: add $400 – $1,200 depending on rot extent
- Sliding door track and roller repair: $150 – $400
- Jamb or sill structural repair: $500 – $1,400
What moves the price is what’s behind the trim. A clean swap on a sound opening stays at the lower end. A rotted jamb discovered mid-install adds material and labor, but you’ll know the written price before we start and we don’t change it unless you approve a written change order. Call (817) 686-2228 for a free estimate.
We Also Serve Cities Near Millbrae
Our crews cover Millbrae and the surrounding Peninsula communities. If you’re in San Bruno, Burlingame, South San Francisco, or Pacifica, the same written-price discipline and 365-Day Done Right Promise applies. We run each job the same way regardless of the zip code.
Serving Millbrae, CA - Our Local Coverage Area
We’re based in the Millbrae area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Patio Door Installation in Millbrae
If the track is corroded but the frame and jamb are sound, it’s usually a repair costing $150 – $400. If the track has lost structural integrity or the jamb is soft, it becomes a replacement. We’ll tell you which it is before you spend a dollar, not after we open the wall. Call (817) 686-2228 and we’ll give you a straight answer.
Yes. A patio door replacement in Millbrae that changes the rough opening or structural framing requires a building permit, and the work is subject to inspection. We pull the permits and handle the inspection process on your behalf, so you don’t have to navigate the city’s building department yourself.
Low-E insulated glass at minimum, and impact-rated glazing if the door faces open bay exposure. A standard clear unit will leave the room cold and underperform. We spec PGT or CGI impact-rated glass for Millbrae’s wind-driven moisture and marine air; the difference is significant over the door’s life.
A standard sliding door swap takes one day; a full-frame replacement with jamb work takes two to three days. We do not offer same-day installation because the job has to be ordered, permitted where required, and scheduled properly. Rushed work on a load-bearing opening is how warranties get voided. We schedule it right the first time.
Rot. That’s the one thing that moves the number. If the jamb or sill is soft, we’ll stop, show you what we found, and give you a written change order before any additional work happens. You approve it or you don’t; there’s no pressure and no surprise charge at the end. Call (817) 686-2228 to scope your job before you commit to anything.
Written by Elliot Vance, Owner at Meridian Windows & Doors, serving Millbrae.










Before
After
Before
After
Before
After