Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterECO Window Systems Window Installation: The Los Angeles Owner’s Guide
We install and replace ECO Window Systems windows across Los Angeles, with most full-frame or retrofit installation jobs running $850 – $1,400 per opening depending on size, series, and what the rough opening needs. Most ECO Window Systems installations are done in a single day per window, and we keep common installation hardware on the truck: shims, flashing, backer rod, and sealant matched to the frame material. The usual discovery path is a homeowner noticing drafts, a sash that drags, or water staining below the sill after a winter rain. That staining is the tell: the original seal or flashing has gone, and moisture is finding the path of least resistance into the wall cavity.
We’re an independent Los Angeles installer, not affiliated with ECO Window Systems. What that means for you is we spec the part or window to the existing opening without bias toward one brand.
Key Takeaways:
- ECO Window Systems installation in Los Angeles typically runs $850 – $1,400 per window, installed.
- We carry installation hardware and flashing matched to ECO Window Systems frame profiles.
- Most single-window installs are completed same-day once the opening is prepped.
- Every job gets a written price before work starts and a 365-Day Done Right Promise in writing.
Which ECO Window Systems Models This Applies To
ECO Window Systems makes aluminum and vinyl frame lines, and the installation requirements shift meaningfully between them. The aluminum series common in mid-century Los Angeles homes and condo buildings uses a narrower frame depth, which changes the shim space and the flashing detail at the sill. The vinyl frames are thicker, which means the interior trim return usually needs a different backband depth or a cleaner caulk line.
To identify the right part for your window, pull the sash and look for a label stamped on the top or side rail: the series name sits next to the glass code. If the label is gone or worn, measure the frame depth at the jam. Aluminum ECO frames run about 2-1/2 to 2-3/4 inches deep; vinyl runs 3-1/4 and up. That measurement alone tells us what flashing and shim stock to bring. For genuine ECO Window Systems hardware, OEM parts match the original mill tolerances and are worth the wait if you’re keeping the sash and replacing only failed glazing or a lock. But for weatherstripping, sweeps, and balance hardware, quality aftermarket parts from the same extrusion supplier often perform identically at 30 to 40 percent less than OEM. We’ll tell you which is which before we order.
Signs Your ECO Window Systems Window Installation Is Failing
- Draft that moves a candle flame a foot away. The original seal has compressed or cracked, usually at the meeting rail or the sill corner. Los Angeles’s hot-dry summers bake the seal, and winter rains exploit it.
- Water staining on the drywall below the window. This means the sill flashing or the exterior seal has failed and water has been traveling inside the wall. In stucco-clad Los Angeles homes, the usual suspects are missing weep holes or a torn sill pan under the frame.
- Sash that drags or sticks halfway up. The balance hardware is losing tension or the track has collected enough La Cienega dust to bind. Forcing it will bend the sash rails or snap the shoe.
- Condensation you cannot wipe away. Moisture trapped between the glass panes means the seal on the insulated glass unit has gone. On ECO windows with a 10- to 15-year age mark, this is common. The unit needs replacement, not the whole frame.
- Frame that has pulled away from the stucco or siding. You can see daylight or a gap that widens at the corner. The opening was not shimmed square at the original install, and thermal movement in Los Angeles heat has made it worse.
Replacement Cost & What’s Included
For ECO Window Systems installation in Los Angeles, most single-window installs run $850 – $1,400. A standard retrofit into an existing rough opening with new flashing, sealant, and basic interior trim lands on the lower end. A full-frame replacement where the old frame is pulled, the rough opening re-squared, and new sill pan flashing is set lands on the higher end. Larger openings, second-story work, and stucco repair will push the range to $1,600 – $2,200 per window.
Every one of those prices goes on paper before we start. Our quote lists the window or the part line-by-line, the labor, the flashing and sealant, and whatever disposal costs apply to Los Angeles County. If we hit a wall cavity issue we didn’t expect, we stop and put the change in writing before touching it – not after the job. The work is then covered in writing for 365 days. If a seal fails or the install sags, we return at no charge. That’s the whole point of the Done Right Promise.
DIY or Call Us?
Some checks are safe and sensible: run your hand along the interior frame on a cold morning to find the draft, inspect the caulk line at the exterior sill for cracks, and look for water stains below the corners after rain. Those will tell you what’s failing and roughly which part needs attention.
The install itself is a different animal. ECO Window Systems frames carry real glass weight, and a rushed shim job will bind the sash and rot your rough opening from the inside out. Bad flashing on a stucco Los Angeles wall will not show itself for a year, then it will eat your drywall. Fall off a ladder and the warranty won’t matter much. If you want to watch one get installed before deciding, call us at (817) 686-2228 and we’ll take you through the last ECO install we ran in the Valley or the Westside – including the parts we threw out so we didn’t have to do it twice. You’ll see the discipline before you buy it.
FAQs
A properly flashed and sealed installation should last 20 to 30 years in Los Angeles before the frame or flashing needs rework, though seals and weatherstripping typically need attention at year 10 to 15 depending on sun exposure. South- and west-facing windows on the Valley floor wear faster because they bake in afternoon heat. Call (817) 686-2228 and we’ll inspect your southern exposure and give you a straight answer on what’s left.
Yes, if the failure is isolated to the seal, the weatherstripping, or the flashing at the sill corner. If the rough opening itself has moisture rot or the frame has pulled out of square, replacing the entire installation is the only repair that holds. We’ll quote the smaller fix when it’s honest to do so.
Most single-window ECO installations take one day from tear-out to final trim and clean caulk line. Larger jobs with multiple openings and stucco work may run two to three days. We’ll put the schedule in writing with the price.
We carry standard shim stock, backer rod, sealant, and flashing matched to both aluminum and vinyl ECO profiles. Model-specific hardware from ECO Window Systems is ordered per job and typically arrives in Los Angeles within a week. If the part is a common aftermarket equivalent with the same extrusion tolerances, we’ll have it ready to call.
Get a Written Price Before You Commit
If you have an ECO Window Systems window that is drafty, stuck, or leaking, call (817) 686-2228. We’ll walk the opening, make the measurements, and put a line-item price in front of you before any work starts. We install and replace ECO Window Systems windows across Los Angeles, and our people answer the phone around the clock. We also install and replace products from PGT, CGI, and CWS, plus the rest of our eight-line portfolio. The price goes in writing, the work is covered for a full year, and if it is not done right we return at no charge. That’s The Garrison Standard on every job since 2009.
Measure it right, seal it tight, and the door does the rest.
Written by Elliot Vance, Owner, Meridian Windows & Doors at Meridian Windows & Doors, serving Los Angeles and nearby areas.