Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Patio Door Installation Across Dixon
A patio door replacement in Dixon typically runs $2,800 to $6,400 installed, with impact-rated glazing units pushing toward the higher end because of local wind-exposure requirements. Most jobs take two to four weeks from signed proposal to final inspection, depending on the permit schedule and the specific door you order. If you’re off North First Street, near Valley Glen, or out toward Porter Road, our crews know the housing stock and the inspection process here. Call (817) 686-2228 for a written, line-item price before any work starts.

Why Meridian Windows & Doors Is Dixon’s Preferred Patio Door Installation Company
Dixon homeowners have a specific set of frustrations with contractors, and we built our process around eliminating each one. Our Patio Door Installation team shows up when we say we will. The price you approve is the price on the invoice, period. And every job carries the 365-Day Done Right Promise in writing: if the installation fails within a year, we come back at no charge. No fine print about labor exclusions. No chasing a sub who disappeared.
We’re part of the Garrison Partners family, held to The Garrison Standard since 2009. That means background-checked, uniformed technicians on every call, so you know exactly who is walking through your door before you open it. Elliot Vance runs our operation, and he holds every install to the same standard he would want on his own home. When a Dixon homeowner calls, a live person answers, 24 hours a day. Not a voicemail loop. Not a callback tomorrow.
We also know the local realities here. Dixon sits in a high-wind-exposure zone for exterior openings. That changes what gets specified, how it gets inspected, and what the final number looks like. More on that below.
Patio Door Repair in Dixon
Patio Door Repair in Dixon usually means one of three things: a slider that grinds or binds on the track, a fogged insulated glass unit that needs replacing, or a weather seal that has flattened and started leaking air. In Dixon’s windy afternoons, that seal matters. Most repairs run $180 to $700 depending on whether we’re replacing rollers, a track, a seal, or the glass unit itself.
Roller and Track Replacement
When a patio door starts feeling heavy or sounds like it’s dragging gravel, the rollers have typically worn flat or the track has corroded. We pull the sash, clean the track, replace the rollers with the correct weight-rated set, and test the glide. A roller replacement on a Dixon slider generally runs $180 to $320.
Seal and Weatherstrip Renewal
Dixon’s spring winds find every gap. A flattened weatherstrip lets dust and drafts through and makes your HVAC work harder. We measure the existing seal profile, match it, and replace it so the door closes flush. This repair typically runs $140 to $260 and takes under an hour.
Sliding Door Repair in Dixon
Sliding Door Repair in Dixon differs from patio door repair in one key way: it’s often about the glazing, not the hardware. A fogged sliding door means the seal between the glass panes has failed. That’s a glass-unit replacement, not something you can wipe clean. In Dixon’s climate, where temperature swings and wind pressure test the seal daily, this is a common call. Expect $400 to $900 for a new insulated glass unit in a standard sliding door, depending on size and whether it’s Low-E coated.
Fogged Glass Unit Replacement
Once condensation appears between the panes, the argon or krypton gas fill is gone and the unit’s insulating value has dropped. We order the replacement sash or glass unit to the exact size and spec of your existing frame, then swap it in and resecure the glazing stops. The job usually takes one visit after the glass arrives.
Track Alignment and Binding Correction
Dixon homes with stucco exteriors occasionally settle, and that settlement shows up at the patio door first. If the jamb is out of square, the sash binds and the weather seal never seats flat. We check the opening with a level, shim or adjust the track as needed, and get the door closing true. Correcting alignment typically runs $250 to $450.

Trusted Brands We Service in Dixon
We’re authorized to install and replace products from PGT, CGI, and CWS, among our eight manufacturer lines. Why that matters in Dixon: PGT and CGI both build impact-rated glazing units that meet the design pressure requirements this area’s wind exposure demands. When a Dixon homeowner needs a door spec’d for windstorm loss reduction, we order the right unit the first time. And because we stock local parts for Dixon customers, we’re not waiting on a freight shipment from out of state when a track or roller set needs replacing.
Common Patio Door Installation Problems We See in Dixon Homes
- Wrong design pressure ordered: The biggest avoidable delay is ordering a standard dual-pane slider without confirming the required design pressure for Dixon’s wind exposure. When the permit review flags it, the door gets re-ordered and the install slips weeks. We verify the spec before we ever write the order.
- Settled stucco openings: Many Dixon homes built in the 1980s and 1990s have stucco exteriors that have settled slightly. Reusing the original jamb and track means the new sash binds and the weather seal never seats. We check square before we order anything.
- Skipped inspections: A patio door replacement that skips the permit or inspection sign-off leaves the homeowner without the windstorm-loss-reducing paperwork their insurer expects. That’s a problem if a claim ever comes. We pull the permit and we pass the inspection.
- Fogged original glass: In Dixon’s temperature swings, original non-Low-E insulated glass units fail. If the glass has fogged, replacing just the door panel with a new Low-E unit costs less than a full frame replacement and gives you better thermal performance.
Pricing for Patio Door Installation in Dixon, CA
Here are the honest numbers for Dixon. A standard sliding patio door replacement runs $2,800 to $4,500 installed. A French-style or multi-slide patio door runs $4,000 to $6,400. Impact-rated glazing adds $500 to $900 per door over standard dual-pane, and in Dixon’s wind-exposure zone it’s often not optional. The old door’s condition matters too: if the rough opening needs reframing or the stucco repair around the jamb is extensive, that adds labor. The permit and inspection typically run $150 to $400 depending on the scope. We deliver a written, line-item price before any work starts, and that number does not move at the door. Call (817) 686-2228 for your free estimate.
We Also Serve Cities Near Dixon
Our crews regularly install patio doors for homeowners in Davis, Vacaville, Winters, and Woodland. Each city has its own permit office and inspection nuances, and we handle all of them. If you’re in Dixon or any of the surrounding communities, the same written pricing and 365-Day Done Right Promise apply. Call us and we’ll schedule a time that works.
Serving Dixon, CA - Our Local Coverage Area
We’re based in the Dixon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Patio Door Installation in Dixon
Yes. A patio door replacement in Dixon requires a building permit and a final inspection sign-off. The inspection verifies the structural opening, the anchoring, and the door’s design pressure rating for wind exposure. We pull the permit, coordinate the inspection, and provide the sign-off paperwork your insurer may want on file. Call (817) 686-2228 and we’ll walk you through the exact sequence for your home.
Dixon sits in a high-wind-exposure zone, so exterior openings are typically required to meet a stamped design pressure. Impact-rated glazing uses a laminated glass interlayer that holds together under windborne debris and pressure, while standard dual-pane glass does not carry the same rating. It changes the product order and the inspection sequence, but it’s the correct spec here. We’ll confirm the requirement for your specific door before quoting.
Plan on two to four weeks from signed proposal to final inspection. The door itself often takes one to two weeks to arrive from the manufacturer. Installation is typically a one-day job, but the permit review and inspection scheduling add days you can’t skip. Impact-rated units sometimes take an extra week on the order. We give you the calendar in writing at the proposal stage so there are no surprises.
The honest answer: the rough opening. Once the old door is out, we can see whether the framing is square, whether moisture has compromised the sill, and whether the stucco needs repair around the jamb. If the opening needs reframing or there’s hidden water damage, that adds labor and materials. This is why we write the scope from a pre-install inspection, not a guess. The price we quote includes what we can see and the specific contingency for what we can’t. Call (817) 686-2228 for a written quote that accounts for the realities of Dixon’s older housing stock.
Often, yes. If the frame is square and the sash is solid, we can replace rollers, tracks, seals, or a fogged glass unit for $180 to $900 instead of a full replacement at $2,800 and up. The decision comes down to the condition of the frame and the glazing. We’ll tell you straight which repair makes sense and when replacement is the better money. Estimates are free.
Ready to scope your patio door? Call (817) 686-2228 for a written, line-item estimate. Elliot Vance and our crew will walk the job with you, answer every question, and put the price on paper before you commit. That’s how we work in Dixon.
Written by Elliot Vance, Owner at Meridian Windows & Doors, serving Dixon since 2009.










Before
After
Before
After
Before
After