Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindow Company in Temple City, CA
Meridian Windows & Doors is the window and door specialist Temple City homeowners call when they want the price on paper before a single screw turns. Most single-window replacements here run $900 – $2,500 installed depending on size, glass package, and frame condition, and patio door work typically lands between $2,800 and $7,500. We carry eight manufacturer lines so the right product gets spec’d for your house, not whatever happens to be in stock. Call (817) 686-2228 for a free estimate and a written line-item quote.
Why Temple City Homes Are Different
Temple City’s housing stock is largely ranch-style single-story homes built between the 1940s and 1970s, which means we see a lot of original aluminum single-pane windows and wood-frame sliders that have been fighting the San Gabriel Valley sun for 50-plus years. The summer heat here is real, with weeks in the 90s and direct afternoon exposure that turns old aluminum frames into radiators. Low-E glass, a thin coating that reflects heat while letting light through, makes a measurable difference on a west-facing Temple City living room.
Many homes still have their original double-hung wood windows, and the dry heat has done damage over decades: sashes are painted shut, balances snap, and frames have rot where sprinklers hit them. Temple City also sits on flat, well-drained ground, so we don’t deal with the slope and shim complexity you’d find in the foothills, but termite activity in older framing is common across the San Gabriel Valley and affects how we inspect rough openings before an install. Homeowners should also know that visible street-facing changes can trigger a design-review conversation with the Temple City planning office, so we flag that early rather than after the order is placed.
Our Main Temple City Services
Most Temple City calls come in for one of two reasons: a window has failed and the room is uncomfortable, or a patio door has become hard to open. We’re set up for the full job from measurements and order through final trim and haul-away.
Window Replacement in Temple City
Replacement work here usually means pulling a failed aluminum or wood unit and setting a new one into the existing opening. On Temple City ranch homes, the biggest variable is rough-opening condition: we open the wall, check for termite damage and rot in the sill plate, and only then confirm the final opening dimensions. Several homes we’ve done in the Cloverly and Longden areas had original single-pane frames with no flashing, which lets water sit against the framing. Read more on the Window Replacement in Temple City page.
Window Installation in Temple City
A window installation in Temple City is the new-construction or rough-opening job: the old frame comes out completely, the opening gets reframed and flashed to current code, and the new window is set, insulated, and trimmed. That’s a bigger job than a replacement and it’s the right call when the existing frame is too far gone to save. New window work here also typically goes through plan check when it changes the exterior opening size, and we handle the paperwork with the city. See Window Installation in Temple City for specifics.
Patio Door Installation in Temple City
In Temple City, the original sliding patio door is usually an aluminum builder-grade unit that has lost its rollers and scrapes against the track. Installation means removing the old door and frame, correcting any sag in the header, installing the new door on a level sill, and weather-sealing the perimeter. For homes on slab foundations, a sliding door provides a simple floor-level transition, and the older ranch layouts in Temple City are laid out well for them. Details are on the Patio Door Installation in Temple City page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Temple City
Our Temple City work draws from the PGT, CGI, CWS, and ES Windows lines, with the right product matched to the exposure and frame condition of the home. Standard parts for these brands arrive quickly, and once the units are on site, the work moves fast. A full view of what we work with is on our brands page.
Pricing for Window Company in Temple City, CA
| Service | Typical Range in Temple City |
|---|---|
| Single window replacement | $900 – $2,500 |
| Full-home window replacement (8 – 12 windows) | $8,000 – $24,000 |
| Window installation (new construction / rough opening) | $1,100 – $3,000 per window |
| Sliding patio door installation | $2,800 – $5,500 |
| French patio door installation | $3,500 – $7,500 |
| Vinyl window replacement | $900 – $1,800 |
| Fiberglass window replacement | $1,200 – $2,500 |
| Aluminum window replacement | $950 – $1,900 |
| Impact-rated window | $1,600 – $3,400 |
What pushes a Temple City job higher is usually one of three things: a rotted rough opening that needs reframing, a plan-check submittal when an opening changes size, or upgrading to impact-rated glass. Whatever the number is, you’ll have it written down before the work starts, and it won’t move at the door.
Neighborhoods We Serve in Temple City
We work throughout Temple City, from the older ranch tract streets north of Las Tunas to the neighborhoods along Longden, Live Oak, and Rosemead Boulevard. Each small area has its own pattern: tighter setbacks affect access for staging, and some streets have mature trees that change how we handle upper-floor ladder work.
- Cloverly
- Longden
- Temple City High area
- Baldwin Stocker area
- Emperor Elementary area
Service Area – Cities Near Temple City
Meridian Windows & Doors serves Temple City, CA and the surrounding San Gabriel Valley. Scheduling and dispatch are coordinated from our Los Angeles office, and crews are assigned locally. We also provide window and door work in El Monte, CA, San Gabriel, CA, Arcadia, CA, and Rosemead, CA.
Serving Temple City, CA - Our Local Coverage Area
We’re based in the Temple City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Company in Temple City
We schedule Temple City work within the week in most cases. Once you call, we set a firm appointment time and the crew arrives when we say they will. If the situation is urgent, a live person answers the phone around the clock and we’ll get you on the schedule.
Replacement windows that keep the same opening size typically move forward without a permit. If the rough opening changes size or a new opening is created, the City of Temple City will require a building permit. We confirm that during the site visit and handle the plan check and inspection process.
No. The price we put in front of you before any work starts is the price on the final invoice, unless you ask us to add scope during the job. If we find rot or termite damage in a rough opening, we’ll stop, show you what we found, and put the added cost in writing before proceeding. Call (817) 686-2228 to schedule a free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Temple City Customers Say
"Patio door replacement. Smooth sliding and a tight seal. Old door hauled away."
- Lena C."Solid install. Scheduling slid by a few days because of weather."
- Mona H."Front door and sidelights replaced. Weatherstripped and foamed properly. No more drafts."
- Brett A.