French & Double Doors

French & Double Doors in Los Angeles, CA | Meridian Windows & Doors

French and double doors bring something to a home that sliding glass panels rarely match: a true wide opening, symmetrical sightlines, and a sense of occasion every time you step outside. In Los Angeles, where indoor-outdoor living is the whole point of the architecture, these doors matter even more. Meridian Windows & Doors supplies and installs paired impact-rated French doors built with laminated glass in every lite, so the view stays open while the structure behind it is engineered for real wind loads. We install across PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines, and every unit gets set level, plumb, and square per AAMA 2400/2410 practice. Call (817) 686-2228 to talk through configurations and get a written line-item quote.

Call (817) 686-2228

Product Overview – French & Double Doors

French and double doors are paired door panels hinged at the frame that swing open from the center, creating a full-width passage between interior and exterior spaces. Unlike sliders, they offer a clean, symmetrical look from both inside and out, with each panel carrying glass all the way through. The impact series we install in Los Angeles pairs that classic profile with laminated impact glass in every lite, so there is no weak point in the glazing when a storm approaches.

The frame is the other half of the story. These doors are built in aluminum or vinyl, which gives two distinct performance profiles. Aluminum carries the clean, narrow sightlines that architects spec on modern and coastal homes, while vinyl offers a thermal break that homeowners in inland Los Angeles neighborhoods often prefer for afternoon sun exposure. Both materials are extruded to hold the laminated glass system tightly, and both accept multi-point locking hardware that anchors the active panel to the frame at the top, bottom, and center.

Where these doors really prove themselves is in hurricane-prone construction. Los Angeles sits in a wind-borne debris region under Florida Building Code, which means glazed openings have to survive impact and cyclic pressure, not just look good. The paired French door configuration is tested and accepted for that duty: the PVB interlayer inside each lite holds the glass in the frame under impact, and the framing is engineered to transfer wind load to the rough opening without flexing or separating. Meridian Windows & Doors has installed these systems on homes from the beachside streets of Los Angeles to inland neighborhoods, and the same detail applies every time: correct anchoring, correct sealing, correct operation.

Technical Specifications

Here’s what you can expect from the French and double door impact series we install in Los Angeles:

• Frame materials: Aluminum or vinyl, both engineered for impact-rated glazing and coastal exposure
• Maximum width: Up to 96 inches wide across the pair, configurable to your rough opening
• Glass options: Laminated impact glass with PVB interlayer, Low-E insulated glass, tinted glass, or clear glass
• Finish options: White, almond, bronze, black, and tan across the frame lines we carry
• Hardware: Multi-point locking system on the active panel with flush bolts on the secondary panel
• Design pressure: Matched to your wind zone, up to +/-100 PSF, never higher than what your specific zone requires
• Compliance documentation: Miami-Dade NOA and Florida Product Approval numbers available per configuration

Every order gets configured to your exact opening dimensions and wind zone. There’s no cookie-cutter sizing on impact doors, and we’d rather measure twice and quote once.

Hurricane & Compliance Performance

Laminated Impact Glass – Each lite carries a PVB (polyvinyl butyral) interlayer between two panes of glass. When debris strikes, the glass may crack but it stays in the frame, held by that interlayer. That is the core of impact protection, and it is standard on every French and double door we install in Los Angeles.

Miami-Dade NOA / FL Product Approval – Every configuration we quote carries a Miami-Dade Notice of Acceptance and Florida Product Approval number. These are issued per configuration, meaning the exact size, glass package, and frame combination on your quote has its own documentation. We verify the numbers on your specific quote before you commit.

FBC / HVHZ Compliance – The doors are engineered to Florida Building Code High-Velocity Hurricane Zone requirements. HVHZ is the strictest standard in the Florida code, and Los Angeles falls under its jurisdiction. When your permit reviewer asks for product approval, we provide it.

TAS 201 / 202 / 203 Testing Context – HVHZ-rated products are tested under a protocol family: TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance. These are the tests that verify a door will hold up under repeated wind gusts and impact, not just a single hit.

Design Pressure for Your Wind Zone – We match the design pressure to your specific wind zone in Los Angeles, up to +/-100 PSF, never higher. Ordering a door with a higher DP rating than your zone requires adds cost without adding safety. We size the system to what your building envelope actually needs.

Energy Performance – Low-E and insulated glass options are available for homeowners who want impact protection plus better thermal performance. In Los Angeles, where afternoon sun beats on west-facing openings, Low-E can make a real difference in how the room feels. We’ll walk you through the tradeoffs when we quote.

Color & Glass Options

The finish and glass you choose changes how these doors feel on the house. On the frame side, we carry white, almond, bronze, black, and tan across the lines we install. White and almond read clean and traditional, which suits the Mediterranean and Spanish-inspired homes you see throughout Los Angeles. Bronze and black give a sharper, more contemporary line that works well on modern builds and darker-trimmed exteriors. Tan is a quieter neutral that blends into stucco and earth tones without calling attention to itself.

On the glass side, clear impact glass is the most popular choice for homeowners who want maximum light and an unobstructed view. Tinted glass cuts glare and solar heat, which matters on east- and west-facing openings in Los Angeles. Low-E insulated glass is the best pick when energy performance is a priority, and it pairs naturally with vinyl frames that already carry a thermal break. Laminated impact glass is the foundation underneath all of it, whichever surface option you choose.

Installation by Meridian Windows & Doors in Los Angeles

A properly manufactured impact door still fails if it is installed wrong. The NOA-rated system depends on how the frame is anchored, sealed, and squared. That’s why Meridian Windows & Doors treats installation as part of the product, not an afterthought.

We start with a pre-install inspection of the rough opening. We check the sill, the jamb depth, and the anchoring surface before the old unit comes out. When the new door goes in, we set it level, plumb, and square – not close enough, but correct. The perimeter gets sealed with AAMA 812 low-expansion foam, which fills the gap without deflecting the frame, and the practice follows AAMA 2400/2410 standards for installation of fenestration products. After the door is anchored and trimmed, we run a water test on the sill and bottom corners, inspect operation of both panels and the multi-point lock, and clean up the work area.

In Los Angeles specifically, coastal exposure means salt air is a constant factor, and the wind zone you’re in determines the anchoring schedule and product approval documentation your permit will require. We pull the right product approval paperwork for your configuration and make sure the installation matches what the permit reviewer expects to see. If a re-roof or stucco repair is part of the scope, we coordinate so the opening stays watertight through the whole job.

Frequently Asked Questions – French & Double Doors

Get a Quote – French & Double Doors in Los Angeles

The right French or double door for your Los Angeles home depends on your wind zone, your opening, and how you want the door to look from both sides. Call (817) 686-2228 to start a project or schedule a free on-site measurement. We’ll walk you through configurations, finishes, and glass options and put a written line-item quote in your hands.

Written by the team at Meridian Windows & Doors, serving Los Angeles, CA with hurricane-impact windows and doors across PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines.