Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterAwning Windows in Los Angeles, CA | Meridian Windows & Doors
Awning windows are top-hinged, crank-out windows that open from the bottom, tilting outward like a small canopy. In hurricane country, that geometry matters: you can leave them cracked open during a passing rainstorm and the glass sheds water away from the opening instead of letting it pour inside. Meridian Windows & Doors supplies and installs impact-rated awning windows across Los Angeles, CA, with laminated impact glass in weathertight aluminum or vinyl frames. We carry PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines, and our crews set every unit level, plumb, and square per AAMA 2400/2410 practice. Call (817) 686-2228 to talk through sizes, glass, and finishes for your project.
Product Overview – Awning Windows
Awning windows have a distinct place in hurricane-prone residential design. Because the sash is hinged at the top and cranks outward, the window can stay open in wet weather, which is exactly why you see them in Florida kitchens, bathrooms, and bedrooms where cross-ventilation matters. When closed, the sash presses against the frame weatherstrip, and the outward-opening geometry means wind pressure pushes the sash tighter into its seal rather than trying to pry it open. That’s a genuine advantage during storm conditions.
The impact-rated version of this profile pairs that geometry with laminated impact glass. A PVB (polyvinyl butyral) interlayer sits between two panes and holds the glass in the frame if something hits it. The frame itself, whether extruded aluminum or multi-chamber vinyl, carries the load to the surrounding structure. In Los Angeles, where older single-family homes and mid-century builds often have fixed or jalousie windows in awkward spots, awning units are a straightforward upgrade that keeps the original sightlines while adding real storm protection. Meridian Windows & Doors handles the full supply and install package, and we spec design pressures to your wind zone rather than selling one-size-fits-all glass. If you’re researching options for a Los Angeles home, call (817) 686-2228 and we’ll walk you through what fits your openings.
Technical Specifications
- Frame materials: Extruded aluminum or multi-chamber vinyl, both sized for impact glazing
- Glass options: Laminated impact glass with PVB interlayer, Low-E insulated glass, tinted glass, clear glass
- Finish options: White, almond, bronze, black, tan
- Screen options: Fixed screen or retractable screen
- Operation: Crank-out, top-hinged, hardware tested under HVHZ loading
- Design pressure: Matched to your wind zone, up to +/-100, never higher
- Compliance documentation: Miami-Dade NOA and Florida Product Approval numbers available per configuration, verified on your quote
Hurricane & Compliance Performance
Laminated Impact Glass – The core of the system. Two panes of glass bonded with a PVB interlayer that holds the pane in the frame under impact. If the outer lite breaks, the interlayer keeps the opening sealed so wind and rain don’t pressurize your home. This is the glazing standard we spec on every impact awning window we install in Los Angeles.
Miami-Dade NOA / Florida Product Approval – Every configuration carries either a Miami-Dade Notice of Acceptance or a Florida Product Approval number, issued per specific size, glass, and frame combination. We verify the exact number on your quote so your permit application has the right documentation attached the first time.
FBC / HVHZ Compliance – The units are engineered to Florida Building Code High-Velocity Hurricane Zone requirements. HVHZ is the strictest building code in the state, written for Miami-Dade and Broward counties, and it’s the benchmark we hold our Los Angeles installs to regardless of which jurisdiction we’re working in.
TAS 201, TAS 202, TAS 203 Testing Context – This is the protocol family HVHZ-rated products are tested under. TAS 201 covers large-missile impact, TAS 202 covers cyclic wind-pressure loading, and TAS 203 covers forced-entry resistance. Together they simulate what a window actually endures during a storm, not just a single hard hit.
Design Pressure for Your Wind Zone – Design pressures are matched to your wind zone, up to +/-100, never higher. We don’t oversell a PSF rating that doesn’t apply to your house, and we don’t under-spec a unit that will fail inspection. Your quote lists the exact DP for each opening based on your roof height, exposure, and location.
Energy Performance – Low-E insulated glass is available for every awning configuration in the catalog. The Low-E coating cuts solar heat gain, which matters in Los Angeles where air conditioning runs most of the year. Tinted and clear glass round out the options, so you can balance glare, privacy, and natural light per room.
Color & Glass Options
The finish palette spans white, almond, bronze, black, and tan. Bronze and black read well on coastal and Mediterranean-style homes around Los Angeles, especially when paired with dark trim or terracotta roofing. Almond and tan blend into stucco-heavy neighborhoods where you don’t want the windows to compete with the exterior. White is the classic choice for clean, bright interiors and works on nearly everything.
Glass selection depends on orientation and room use. Laminated impact glass is the non-negotiable base layer for hurricane protection. Add Low-E insulated glass to it when the window faces west or south, where afternoon sun loads up the room. Tinted glass cuts glare without changing the exterior look dramatically. Clear laminated glass is what you want in a kitchen or living area where you want maximum natural light and an unobstructed view out. We’ll help you pair glass and finish to the room, and you can see physical samples before you commit. Call (817) 686-2228 to arrange that.
Installation by Meridian Windows & Doors in Los Angeles
An impact window is only as good as its installation. The NOA rating applies to the complete assembly, frame to glass, and if the unit isn’t set correctly, the whole rating is compromised. That’s why every awning window we install in Los Angeles follows the same process.
We start with a pre-install inspection of the rough opening. We’re checking the surrounding wall for rot, termite damage, or framing problems that would prevent a proper anchor. Then we set the unit level, plumb, and square, shimmied at the correct points so the frame doesn’t rack or bind. The perimeter gets AAMA 812 low-expansion foam sealant, which seals without bowing the frame. Fastener spacing and embedment follow AAMA 2400/2410 practice, which is the installation standard we work to on every job.
Los Angeles has a mix of coastal exposure zones and inland wind zones. A beachfront property in Pacific Palisades carries a different design pressure than a bungalow in Los Feliz. We pull the right permit documents and submit the NOA or Florida Product Approval numbers that match your specific configuration. After the unit is set and sealed, we run a water test on the perimeter, clean the site, and walk you through operating the crank hardware. The goal is a window that works smoothly on day one and still seals tight twenty years from now.
Frequently Asked Questions – Awning Windows
Design pressures are matched to your wind zone, up to +/-100, never higher. Your specific rating depends on your address, roof height, and exposure category, and it’s calculated per opening, not per product line. We list the exact DP on your quote. Call (817) 686-2228 for a project-specific number.
Lead time varies by manufacturer and configuration. PGT and CGI schedules shift with demand, especially heading into hurricane season. We’ll give you a written time frame when you place the order, and we’ll keep you updated if the factory changes anything. The best way to lock in a slot is to finalize your quote early.
Yes. In most Los Angeles jurisdictions, your permit application needs the NOA or Florida Product Approval number that matches the exact size, glass, and frame configuration you’re installing. We provide the correct documentation per opening as part of your quote package, so your permit reviewer has what they need without back-and-forth.
Most openings can be filled with a standard size, but custom dimensions are available across the manufacturers we carry. Width, height, glass type, finish, and screen option all configure per window. We’ll measure your rough openings and spec each unit individually, so a mixed house with three different opening sizes doesn’t end up with compromise units.
Rinse the frame with clean water every few months, especially on coastal properties where salt settles on the aluminum. The crank mechanism needs light lubrication on the sliding parts about once a year. Keep the weep holes at the sill clear, and inspect the weatherstrip around the sash perimeter. That’s the entire maintenance routine. Call (817) 686-2228 if you want us to take a look during a service visit.
Get a Quote – Awning Windows in Los Angeles
If you’re replacing windows or planning new construction in Los Angeles, CA, we’ll spec the right awning windows for your openings, wind zone, and finish preferences. Call (817) 686-2228 to schedule a free on-site measurement or request a written line-item quote. We’ll walk you through every configuration before you sign anything.
Written by the team at Meridian Windows & Doors, serving Los Angeles, CA with hurricane-impact window and door installation across PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass product lines.
Detailed Images
