Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterCGI Windows & Doors in Miami, CA | Meridian Windows & Doors
We’re Meridian Windows & Doors, an independent CGI service in Hialeah and across Miami. The short version: we repair and replace CGI impact windows and doors, we know which models hold Miami-Dade NOA approval, and we write the price down before any work starts. If your CGI window is fogging, binding, leaking at the sill, or failing to latch after years of salt air and sun, call (817) 686-2228 and we’ll take a look. Free estimates, every job.
Why Miami Residents Choose Us for CGI Service
We’ve spent years taking apart and rebuilding CGI sales & service hardware across South Florida, learning the profiles, the roller specs, the glazing channels, and the specific ways CGI units fail in this climate. We’re not factory-trained by CGI and we don’t claim to be. What we are is hands-on familiar with the equipment in a way that only comes from field work: pulling a Series 7000 sash to diagnose a warped vinyl bead, swapping rollers in a Series 5000 horizontal slider that’s been fighting salt corrosion, re-glazing a sliding glass door that’s delaminating at the edge. Elliot Vance, who runs our service crews here, learned the trade at Los Angeles Trade-Technical College and has spent the better part of two decades on job sites. He reads a rough opening correctly the first time. Our techs are background-checked, uniformed, and they’ll tell you straight whether a repair makes sense or whether the frame is too far gone to save.
Common CGI Windows & Doors Problems We Solve in Miami
- Salt-air corrosion on horizontal slider rollers. Miami’s coastal air carries enough salt to eat stainless steel faster than most people realize. CGI Series 5000 horizontal rollers bind, the sash drags, and if you ignore it, the track gets scored and you’re paying for more than rollers.
- Warped vinyl frames on west-facing exposures. The intensity of Miami sun, year-round humidity, and heat bouncing off concrete driveways puts real stress on CGI vinyl frames. When a west-facing Series 7000 frame warps, the weather seal breaks and wind-driven rain finds its way inside.
- Clogged weep holes after storm season. Wind-blown debris and pollen collect in CGI impact window weep holes. Water pools in the sill, sits against the frame reinforcement, and eventually rust starts. We clear them and check for the damage the standing water already did.
- Edge delamination on impact laminated glass. South-facing, unshaded CGI units take prolonged heat and moisture. The interlayer in the laminated impact glass can start to separate at the edges. Once it starts, it doesn’t stop on its own.
- Fogging between the panes. When an IGU seal fails in a Miami climate that cycles between hot and wet, condensation gets in and stays. The glass loses clarity, and in an impact unit it’s not just cosmetic.
CGI Service in Miami: What Local Conditions Mean for Your Equipment
Here’s the thing most homeowners don’t learn until a permit gets rejected: Miami-Dade County enforces one of the strictest product-approval protocols for impact windows in the country. Every CGI unit we install or repair in Miami must carry a Miami-Dade NOA (Notice of Acceptance) or Florida Product Approval. Many standard CGI impact models already hold that approval. Older non-impact CGI lines do not. So if you’ve got a non-impact CGI window that needs full-frame replacement, you’re often looking at upgrading to a compliant impact series whether you planned to or not. That’s not us upselling; that’s the code. We navigate that paperwork on every job, and we’ll tell you before we order anything what the compliance path looks like for your specific unit.
CGI Models & Products We Service in Miami
We work on the CGI Series 7000 Impact Single Hung, the Series 5000 Vinyl Impact Horizontal Roller, the Series 8000 Impact Sliding Glass Door, and CGI Entry Door Systems with impact-rated glazing. We source OEM-spec replacement hardware when it’s available: rollers, locks, balances. When CGI parts are discontinued, we use equal-or-better aftermarket impact-rated glass and reinforced frames, not whatever happens to be on the shelf at the supply house. If a CGI frame is structurally compromised by corrosion or warping, we recommend full-frame replacement over repeated repairs. In Miami’s exposure, patching a compromised frame is a losing game. The price savings today disappear the next time a storm pushes water through the same weak point.
CGI Service Pricing in Miami
Most CGI window and door repairs in Miami fall into predictable ranges. A roller replacement on a horizontal slider typically runs $180 – $320 installed, depending on how many rollers and whether the track needs cleaning or repair. Replacing a failed IGU in an impact window is usually $400 – $900, more if the glass is oversized or has a custom tint. Full-frame replacement with a compliant CGI impact window generally lands between $2,100 and $4,800 per opening, labor included. The condition of the existing frame decides most of that spread. Every estimate we give is written, line-itemed, and it doesn’t change at the door. Call (817) 686-2228 and we’ll schedule a time to look, measure, and put a number on paper.
Serving Miami, FL - Our Local Coverage Area
We’re based in the Miami area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – CGI Windows & Doors in Miami
Yes, and it usually means replacing the insulated glass unit, not the entire window. The failed seal can’t be resealed from the outside, so we order a new IGU with impact-rated laminated glass that matches the Miami-Dade approval on your existing frame. Call (817) 686-2228 and we’ll measure and quote it for free.
We do, and when OEM CGI rollers aren’t available we use equal-or-better aftermarket impact-rated hardware matched to the track profile. The bigger issue in Miami is that salt air corrodes the hardware, so we also check the track before reinstalling. No point putting new rollers into a scored track.
West- or south-facing vinyl frames take direct UV plus heat radiated off pavement and stucco. Year-round humidity doesn’t help. Warping usually starts with the glazing bead shrinking and pulling away from the glass, then the frame follows. If the warp is severe enough to break the weather seal, replacement is the honest call. If we catch it early, re-sealing and re-glazing can buy you time. Call us at (817) 686-2228 and we’ll tell you straight which one you’re looking at.
Yes, and in Miami-Dade County that’s often what the code requires once the unit needs full-frame replacement. We spec a CGI impact series that carries the right NOA or Florida Product Approval, pull the permit, and handle the paperwork. Your quoted price includes all of that before work starts.
If we have the rollers in stock, it’s a same-day fix in most Miami neighborhoods. If we have to order OEM-spec hardware, you’re looking at three to seven business days. Either way, you’ll know before we start. Call (817) 686-2228 for current availability.
Service Areas Near Miami
We handle CGI service throughout the Miami service area and nearby communities. Our crews also run jobs in Los Angeles, San Diego, San Jose, San Francisco, Fresno, and Sacramento. If you’re in CGI service in Long Beach or CGI service in Oakland, we’ve got teams there too. Wherever you are, the written price and the 365-Day Done Right Promise come with us.
Book Your CGI Service in Miami Today
We’ll send a background-checked tech to your Miami home, diagnose the issue, and put the full price in writing before any work begins. The guarantee is simple: if it fails within 365 days, we come back at no charge. Call (817) 686-2228 or schedule your free Miami Window Installation estimate online.
Written by Elliot Vance, Owner at Meridian Windows & Doors, serving Miami, CGI in Pembroke Pines, and the surrounding areas.