Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Window Installation Across Weston
Window installation in Weston, FL runs on a different set of rules than most South Florida suburbs because of one fact most homeowners don’t learn until a permit gets pulled: Weston sits inside Broward County’s High-Velocity Hurricane Zone (HVHZ). That means replacement windows have to meet the same impact and design pressure standards as new construction, even if you’re just swapping out original aluminum single-panes. Meridian Windows & Doors scopes every Weston job that way from the first visit – opening sizes measured, wind-load calculations run, product documentation matched to the permit – so the price you get in writing is the price that holds through final inspection. Call (817) 686-2228 to schedule a free in-home measure and written quote.

Why Meridian Windows & Doors Is Weston’s Preferred Window Installation Company
Weston homeowners tend to be specific about what they want: a crew that shows up when it says it will, a price that doesn’t drift, and a warranty with real terms. Elliot Vance built Meridian Windows & Doors inside the Garrison Partners network to run exactly that way. Every job gets a written price before any work starts. Every installation is covered by the 365-Day Done Right Promise, in writing: if the work fails within the first year, we come back at no charge. Phones are answered by a live person around the clock, so a Weston homeowner with a question never sits in a voicemail loop.
Our crews work regularly in communities like Savanna, The Ridges, and Windmill Ranch Estates, so we know what Weston’s masonry-and-stucco construction does to window openings after twenty or thirty years. That local familiarity shows up in the details: jamb-flashing details spec’d for stucco returns, shimming plans for frames set out of square, and a permit path that’s already been walked dozens of times through Weston’s building department. Part of the Garrison Partners family, held to The Garrison Standard since 2009, and stocked with eight manufacturer lines – PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux – so the right unit gets spec’d for the opening, not the one that happens to be on a warehouse shelf.
Bay Window Installation in Weston
Bay window installation in Weston is one of the more involved replacement projects we take on, and it’s also one of the most rewarding when the right product goes in. A bay window projects outward from the wall plane, which means the opening needs a support structure – typically a cantilevered platform or knee braces – along with a properly flashed roof cap above the projection. In Weston’s HVHZ, that roof cap and the angled flanker windows all have to carry impact-rated glass with design pressure values matched to the actual opening dimensions and wind zone. We’ve installed bay window units in homes throughout Savanna and The Ridges, and the pattern is consistent: the original aluminum single-pane bays from the late 1980s and 1990s have lost their thermal seal and often show corrosion at the mullion joints.
Most bay window replacements in Weston run $3,500-$7,500 installed, depending on opening width, seat depth, and whether the roof cap and support framing need to be rebuilt. That price includes the impact-rated units, flashing, stucco repair around the opening, and the permit. The written quote covers it all before work starts.
Structural support and roof cap replacement
When a Weston bay window has sagged or leaked for years, the support framing under the seat board is usually the first thing to go. We inspect the cantilever framing before ordering glass because replacing rotted supports changes the rough opening dimensions and the design pressure calculation. If you order units first and find rot later, you’re looking at a re-order that can add six to ten weeks to the calendar.
Impact-rated glass matched to the opening
Broward County’s HVHZ rules mean every pane in a Weston bay window – the picture unit in the center and the flankers – has to carry a Florida Product Approval or Miami-Dade NOA number for its exact configuration. We pull those numbers before the permit application goes in, which keeps the inspection from stalling on documentation.
Window Contractor in Weston
Choosing a window contractor in Weston means choosing someone who understands what the permit office in Broward County actually requires, because the documentation burden here is heavier than almost anywhere else in the state. Meridian Windows & Doors runs the full scope for you: opening-by-opening measurements, wind-load calculations, product approvals pulled for each configuration, the permit application, the install itself, and the coordination of the final inspection. We don’t ask a Weston homeowner to chase paperwork or guess at what the building department wants to see.
For a single-story Weston home with six to ten openings, a full replacement typically runs from $8,000 to $18,000 installed with impact-rated units. Two-story homes in communities like Windmill Ranch Estates usually land between $12,000 and $25,000+, because the upper-floor openings often require a lift or scaffold and the wind-load demands go up with height. That’s a real range, not a placeholder – the exact number depends on opening sizes, frame material, and how much stucco repair each opening needs once the old frames come out.
Permit path and inspection coordination
Every Weston window replacement needs a permit, even when the opening size doesn’t change. We handle the application, the product documentation, and the scheduling of the final inspection. Unpermitted work surfaces at resale or on an insurance wind mitigation inspection, and we won’t put a homeowner in that position.
What the Garrison Code covers on the job site
The Garrison Code is a written set of job site commitments our crews work under: floors and walkways protected, work areas left clean at the end of each day, and every change order put in writing before any additional work begins. If something about the scope shifts once the old windows come out – rotted framing, unexpected stucco damage – we stop, document it, and get written approval before proceeding. No surprises at the door with a higher number.
Trusted Brands We Service in Weston
We’re authorized to install and replace products from PGT, CGI, and ViewLux, three Florida manufacturers whose impact-rated product lines are tested and approved for Broward County’s HVHZ. That matters in Weston because a window that carries a generic “hurricane-rated” label but no Florida Product Approval or Miami-Dade NOA number won’t pass inspection here. We spec the right manufacturer for the job – PGT’s laminated glass interlayer for most standard openings, CGI for heavier commercial-style frames, ViewLux when a homeowner wants a cleaner sightline on a modern stucco home – and we stock the trim and flashing components locally so a Weston job doesn’t stall waiting on a small part from out of state.

Common Window Installation Problems We See in Weston Homes
- Original aluminum single-panes with blown seals. Weston’s housing stock was largely built between the late 1980s and early 2000s, which means most replacements are still the original aluminum units. After twenty-plus years of South Florida sun and humidity, the thermal seals fail, condensation forms between the panes, and the frames corrode at the corners. These units were never impact-rated to today’s standard, so replacement isn’t just cosmetic – it’s a structural and code requirement.
- Openings set out of square from original stucco work. Weston’s masonry-and-stucco construction settles over time, and we regularly see openings that are a half-inch or more out of square by the time a replacement is ordered. If the installer doesn’t shim and re-flash each jamb before setting the new unit, the window binds, the weather seal fails, and wind-driven rain finds its way behind the frame.
- Design pressure numbers pulled from a neighbor’s permit. A DP rating is specific to the opening dimensions, the wind zone, and the floor height – not to the house next door. When a Weston homeowner or a contractor copies a design pressure figure from another job without running the actual calculation, the unit fails inspection and has to be re-ordered. That’s six to ten weeks of delay and a second permit cycle.
- Skipped stucco return and jamb flashing. On Weston’s stucco walls, the detail where the window flange meets the stucco return is the difference between a dry install and a leak that shows up months later. We flash every jamb, head, and sill with the right membrane for stucco before the new unit goes in, and we don’t caulk over a gap and call it done.
Pricing for Window Installation in Weston, FL
Most single-window replacements in Weston run $800 to $1,500 per unit installed when the opening is standard and the frame doesn’t need structural work. Impact single-hung units typically land between $900 and $1,800 depending on size and design pressure requirements. Large or custom openings – big picture windows, bays, bows – run $2,500 to $5,000 each because the glass package is heavier and the structural support often needs to be rebuilt. Whole-home packages for Weston houses generally fall between $8,000 and $25,000+, with the higher end reflecting two-story access, heavy stucco repair, and larger opening counts. Every quote we write is a line-item price delivered before work starts, and it doesn’t move at the door. Call (817) 686-2228 to schedule a free in-home measure.
What Window Installation Costs in Weston
What moves the price in Weston more than anything else is the wind zone and the opening dimensions, not the brand name on the glass. A second-floor opening on a two-story home in Windmill Ranch Estates carries a higher design pressure requirement than a ground-floor opening in Savanna, which means a thicker glass package and a more expensive unit. Frame material matters too: aluminum frames are lighter and less expensive, vinyl frames run the middle, and impact-rated vinyl with a reinforced meeting rail pushes toward the upper end. The number of openings drives the total: a six-window job spreads fixed costs like permits and mobilization across fewer units, so the per-window price runs higher than a fourteen-window job. We give Weston homeowners a free in-home measure and a written quote before any work is scheduled, so the cost is known down to the line item.
One comparison worth making before you decide: impact windows versus hurricane shutters. Shutters cost less up front, but they have to be put up and taken down for every storm warning, and they do nothing for energy efficiency, noise, or daily security. Impact windows are permanent protection – the laminated glass interlayer stays in the frame, no panels to hang, no storage, no scrambling when a watch gets posted. Weston homeowners who plan to stay in the house longer than a few years usually find the impact window route pays back in insurance credits and daily comfort, not just storm readiness. Big-box retail installs can look cheaper on paper, but a licensed impact specialist carries the product approvals and the permit documentation Weston’s building department requires – and a failed inspection on a big-box install is a problem the homeowner owns alone.
Florida Pays You Back
The incentives stack further than most Weston homeowners realize. My Safe Florida Home matching grants can cover up to $10,000 of qualifying wind-mitigation upgrades for approved applicants, and impact-resistant windows and doors are Florida sales-tax exempt. On the federal side, the 25C energy credit returns 30% of the product cost on qualifying units, up to $600 per year. Then there’s the insurance piece: after a wind-mitigation inspection ($75-$150), many carriers apply a windstorm-premium credit averaging around 25% on the windstorm portion of your policy for impact-rated windows with proper documentation. Programs and carriers set the final numbers – no installer should guarantee you a specific credit – but the stack is real and worth filing for.
Every impact-rated unit we install in Weston carries the documentation those programs require: Florida Product Approval or Miami-Dade NOA numbers per configuration, design pressure ratings matched to the opening, and wind zone compliance for Broward County’s HVHZ. Design pressure is a PSF rating and never exceeds +/-100. Wind speeds in the 140-170 mph range are wind zone references, not design pressure figures – and we say so plainly so there’s no confusion on the permit or the insurance paperwork.
We Also Serve Cities Near Weston
Meridian Windows & Doors serves Weston and the surrounding South Florida communities, including Miami, Hialeah, Fort Lauderdale, and Pembroke Pines. If you’re in one of those areas, the same written pricing and 365-Day Done Right Promise apply. Learn more about our full Window Installation services, or call (817) 686-2228 for a free estimate.
Serving Weston, FL - Our Local Coverage Area
We’re based in the Weston area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Installation in Weston
Yes, every window replacement in Weston requires a permit through Broward County’s building department, even when the opening size doesn’t change. The permit application includes product approval documentation for each unit and a wind-load calculation matching the opening to the required design pressure. We pull the permit for you and coordinate the final inspection. Call (817) 686-2228 to schedule your free estimate and we’ll walk the permit path start to finish.
Impact-rated means the window’s glass package includes a laminated interlayer – typically a polymer sheet bonded between two panes – that holds the glass together when struck by wind-borne debris during a storm. In Weston’s HVHZ, impact-rated also means the entire unit, frame included, carries a Florida Product Approval or Miami-Dade NOA number for its exact configuration and meets a specific design pressure rating in PSF. A sticker that says “hurricane-rated” without those numbers won’t pass a Weston inspection. Call us for an exact quote on impact-rated units for your openings.
Once your units arrive, installation itself can be completed in as fast as a single day for a standard single-story home with straightforward openings. Custom fabrication runs four to six weeks, and stucco repair around each opening plus final inspection can add one to two weeks beyond the install. We give you the full calendar up front, in writing, before work starts. Call (817) 686-2228 for a free measure and a realistic timeline for your home.
In many cases, yes – impact-rated windows with proper documentation are one of the wind-mitigation measures Florida carriers look for, and a completed wind-mitigation inspection often earns a premium credit averaging around 25% on the windstorm portion of the policy. Final credits are set by your specific carrier and policy, not by the installer. We provide the product approval documentation your inspection will require. Call for a free estimate and ask us about the documentation package.
What changes the price mid-job is almost always a hidden condition behind the old window: rotted support framing, an opening set out of square that needs shimming and re-flashing, or stucco damage that extends beyond the expected repair area. We document any change in writing and get your approval before proceeding – no change order happens without your sign-off. Call (817) 686-2228 to schedule a free in-home measure and get a written price that holds.
Written by Elliot Vance, Owner at Meridian Windows & Doors. Part of the Garrison Partners family and held to The Garrison Standard since 2009. A meridian is a fixed line you measure everything against – that is what the name means and how we run every install in Weston.










Before
After
Before
After
Before
After